- Out-of-Stock
8GB eMMC5.0 Module XU3/XU4 Android
ID: 559201
Pre-installed Android4.4 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba. JEDEC/MMCA version 5.0:HS400 interface with 8bit DDR mode
8GB eMMC Module XU3/XU4 Linux
For ODROID-XU3/XU4
Pre-installed Android4.4 or latest version for ODROID-XU3/XU4.
Ready to run out of box
8Gbyte eMMC Version 5.0 interface from Toshiba.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode.
eMMC Module Reader is included
You need the eMMC Module Reader to update the OS
SD/eMMC PERFORMANCE
You can boot from a MicroSD card or an eMMC module. The MicroSD interface supports the higher performance UHS-1 mode as well. File access of a 512MB file (read/write) on three different storage options shows distinct performance differences. The eMMC 5.0 storage is ~7x faster than the MicroSD Class-10 card in read tests. The MicroSD UHS-1 card is ~2x faster than the MicroSD Class-10 card in read tests. The MicroSD UHS-1 card provides a great low-cost option for many applications!
SD/eMMC PERFORMANCE
Write command
sudo dd if=/dev/zero of=$(mount-path)/test oflag=direct bs=8M count=64
Read command
sudo dd if=$(mount-path)/test of=/dev/null iflag=direct bs=8M
| SD-class10 | SD-UHS1 | eMMC 5.0 | |
| Write speed (MB/s) | 8.5 | 10.8 | 39.3 |
| Read speed (MB/s) | 18.9 | 35.9 | 140 |
Download
559201
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 16,000 measurements / second. It reaches a range of up to 25 m and a measurement error of 1%. DFRobot DFR0583
Retired
No product available!
ZP120.120.60UUJp TM PC - Plastic housing ZP120.120.60 light bottom with ears - colorless top with brass sleeves PC
Retired
No product available!
7-segment LED display, 1 digit 13.20mm, green (575nm), 5mcd (10mA), common anode, red (630nm), 6mcd (10mA), common anode. Pb-free. LED1-AS-B-05211BMRMG
Retired
No product available!
No product available!
NanoPi NEO is a miniature board with the all-in-one SoC Allwinner H3 chip (ARM Cortex-A7) with built-in Ethernet communication. Works with Ubuntu MATE, Debian, etc. It can be powered by the microUSB port. The board also contains a USB port, a serial port and a 36-pin GPIO connector.
Retired
No product available!
The special construction of the braid facilitates installation in all conditions. z28420
Retired
No product available!
No product available!
No product available!
Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is broken out into large sewing pins. Use conductive thread to make your next wearables projects. DEV-13328
Retired
No product available!
No product available!
Expansion board for STM32 Nucleo based on the STSAFE-A110 data security element. The board is compatible with ST morpho and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-SAFEA1A
Retired
No product available!
A power supply dedicated to the analysis of energy consumption by devices in embedded systems. Based on ESP32, it allows you to transfer data to a computer via a USB interface. Odroid SmartPower 3
Retired
No product available!
No product available!
The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan
Retired
No product available!
Orange Pi i96 is an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Raspbian image. It uses the RDA8810 Soc, and has 256MB LPDDR2 SDRAM
Retired
No product available!
No product available!
Pre-installed Android4.4 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba. JEDEC/MMCA version 5.0:HS400 interface with 8bit DDR mode