- Out-of-Stock
Orange Pi Plus - computer with Alwinner H3 processor
ID: 559680
Orange Pi Plus is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 1 Gb Ethernet, WiFi 802.11 b / g / n. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot, 8GB EMMC Flash
Orange Pi Plus
Orange Pi is an open-source computer with the SoC Allwinner H3, it can run operating systems Android 4.4, Ubuntu, Debian. The basic properties of a computer are:
- SoC Allwinner H3 with four ARM Cortex-A7 cores and a Mali400MP2 GPU
- 1GB DDR3 operating memory
- Mass storage: micro-SD card (up to 64 GB), 8 GB EMMC Flash
- Network interface: 1 Gb Ethernet (Realtek RTL8189ETV), WiFi IEEE 802.11 b / g / n
- CSI camera connector
- Supports an 8-bit YUV422 CMOS image sensor
- CCIR656 support (NTSC / PAL)
- Capture video up to 1080p @ 30fps
- Built-in microphone
- Video outputs: HDMI, HDMI CEC
- Audio outputs: 3.5 mm jack, HDMI
- 4 USB 2.0 HOST ports, 1 USB 2.0 OTG port
- 3 buttons
- Goldpin connector (2x20) compatible with a 40-pin connector used, for example, in Raspberry Pi 2
- Infrared receiver
- LED indicating power supply and status
- Available operating systems include Android 4.4, Ubuntu, Debian, Raspberry Pi
- 5V / 2A power supply via a DC jack with a 4.0 / 1.7 mm plug (no power supply via the USB OTG socket)
- Dimensions: 108mm × 60m
- Weight: 50g
In our shop there is also a power supply with a DC 5.5 / 2.1 mm plug , to which an adapter with an output of 4.0 / 1.7 mm should be purchased.
We also offer Orange Pi , Orange Pi PC , Orange Pi Mini 2 , Orange Pi 2 .
Included
- Orange Pi Plus computer
To download
559680
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Adapter for power supply with 5.5 x 2.1 mm input and 4.0 x 1.7 mm output
zł4.70
24h
Available quantity: 10
Available
Compact power supply with a voltage of 12V and a power of 24W, suitable for devices with low power consumption. It has a 5.5 x 2.1 mm connector, often found in industrial cameras, CCTV systems, routers and LED strips. Akyga AK-TB-17
zł34.37
24h
Available quantity: 6
Available
Other products in the same category (16)
The Compute Module 3 Development Kit is for designers who like the Raspberry Pi 3 functionality but need a smaller form factor for their embedded designs. RPI-COMPUTE3-KIT
Retired
No product available!
No product available!
No product available!
AVT kit for self-assembly of a siren for emergency vehicles. AVT789 B
Retired
No product available!
Assembled siren for emergency vehicles. AVT789 C
Retired
No product available!
Battery module with warning not closed Leadbatteries for SITOP DC-USV Modules; DC 24 V 12 Ah. Siemens 6EP4135-0GB00-0AY0
Retired
No product available!
ShutterBox is a device designed to wireless control of electric roller shutters, awnings, screens, etc. by using smartphones and tablets, from any place in the World. It has also powerful time control future, which allows you for example open the blinds on sunrise and close it on sunset
Retired
No product available!
GateBox allows you to open and close the gates, and what’s more, to check their status by using a smartphone or tablet, without the need of purchasing an additional equipment or paying hidden fees
Retired
No product available!
ParkingSensor is an unique RGB LED controller, which helps parking by usi’ng colorful lights
Retired
No product available!
BleBox SwitchBox is a module that allows you to control 230 V home appliances up to 3 kw via a WiFi network using a smartphone application from anywhere in the world. Small dimensions allow you to close the module in an electric box.
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Orange Pi Plus is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 1 Gb Ethernet, WiFi 802.11 b / g / n. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot, 8GB EMMC Flash