Contact strip 2.54mm straight extended 1x8, blue

PRE4562 - AUDIO LINE PREAMPLIFIER - PROGRAMMED SYSTEM

The 4-channel DC motor driver module is designed to work with the M5Stack sets. Powered with the voltage from 6 to 12 V, it can support encoders. M5Stack DC MOTOR

TIGHTENED MANDATOR - A KIT FOR SELF-ASSEMBLY

The Variator is a device that transfers and adjusts the engine torque by changing the ratio of gears. Gear ratio can change automatically, manually or within a pre-set program. The term that most drivers and automobile enthusiasts are more accustomed with is Continuously Variable Transmission, or CVT. With DIY wooden puzzle Variator from the STEM lab collection you can learn and comprehend one of the most important parts of a car without soiling your hands in machine oil! UGears 70147

Insulated fibre-optic probe with a measurement range of up to 2500 V. Operates in a bandwidth of up to 100 MHz and can be connected to an oscilloscope via a BNC connector. Battery-powered. Micsig OIP100B

20-pin straight goldpin female connector with a pitch of 2 mm. For THT mounting. PB20S_2.00mm

UNIVERSAL AMPLIFIER DRIVER - PLATEBOARD AND CONTROLLED LAYOUT

The PCF8574 IO expansion board is an 8-bit I / O expander controlled by the I2C interface. Up to 8 PCF8574 IO expansion cards can be connected to the I2C bus, providing up to 64 I / O ports. Waveshare 3708

Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM526

DISKLAY STROBE - DIODE MATERIAL - PLATE

XTREME DT830B multimeter enabling constant voltage measurement in the range of 200 mV - 500 V, alternating voltage 200 - 500 V, direct current 200 μA - 5 A and resistance 200 Ω - 2 MΩ. DT830B XTREME