- Out-of-Stock
AVT1999 A + - 2-channel MIN-MAX thermometer with alarm. PCB and programmed layout
ID: 572364
Printed circuit board and programmed circuit for the MIN-MAX 2-channel thermometer with alarm. AVT1999 A +
Description
The thermometer is used to monitor temperature in two points using temperature sensors type DS18B20 with a 1-Wire interface.
For each sensor, you can declare the normal temperature range, and if it is exceeded, the acoustic siren will inform you (the signal will sound at intervals as long as the temperature stays higher or lower than the set temperature) and an appropriate message on the display. The thermometer has a memory of the minimum and maximum value with the possibility of resetting it at any time. An additional functionality of the thermometer is the ability to assign an individual name for each of the two measuring points.
Project AVT 1999 EP 08/18
properties
- The temperature range of the sensor is -55 ° C to + 125 ° C
- Measurement accuracy: ± 0.5 ° C (from -10 ° C to + 85 ° C), ± 2 ° C (from -55 ° C to + 125 ° C)
- Reading resolution: 0.1 ° C in the entire measuring range
Included
- PCB board and programmed layout
572364
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
SUPERLUMISATION MODULE 3x3LED GREEN 60mA LIGHT - KIT FOR INDEPENDENT INSTALLATION
Retired
No product available!
Every train needs a proper station and our Railway Platform is just the ticket. In addition to being a beautiful reproduction of a European rail station complete with a clock, lamps and a bench, this model features a secret removable drawer with a lock and key for extra security. UGears 70013
Retired
No product available!
No product available!
Motor with plastic gear 228:1, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 45 RPM and a maximum torque of 7.2 kg*cm. Pololu 1118
Retired
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
AVT kit for self-assembly of the (half) home automation system - four-channel ON / OFF module. AVT3212 B
Retired
No product available!
No product available!
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT
Retired
No product available!
No product available!
Probe for measuring direct and alternating current with a current of up to 30 A. Works in the band up to 100 MHz, it can be connected to the oscilloscope through the UPI connector. It does not require an external power supply. Micsig CP1003
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.33mm and an external diameter of 0.6mm.
Retired
No product available!
No product available!
Banana Pi M2+ is another ARM SoC powered development board that offers great computing performance in an ultra portable form factor. It is a 65mm square with Allwinner H3 Quad-core A7 SoC and 1GB DDR3 RAM
Retired
No product available!
Software to program EEPROM and flash chips in ARM systems, Includes 6 months of free support and updates, Segger
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - gray, with 2xRJ45 connectors
Retired
No product available!
8-bit ST7 MCU, 8kB Flash, 384B RAM, Lite Timer with Watchdog, Autoreload Timer with 32-MHz input clock, SPI, 10-bit ADC with Op-Amp, DIP20, RoHS
Retired
No product available!
Printed circuit board and programmed circuit for the MIN-MAX 2-channel thermometer with alarm. AVT1999 A +