- Out-of-Stock
128x64 RGB LED matrix display P2
ID: 584063
RGB LED matrix display with a resolution of 128x64 (8192 LED). modPan128x64
Description
RGB LED matrix display with a resolution of 128x64 (8192 LED). Each LED can be controlled independently. At least 13 digital GPIOs (HUB75 interface) are required to control the matrix. The matrix has 2 IDC connectors (DATA_IN, DATA_OUT) on the back, so you can connect multiple panels together and create a huge screen. It is recommended to use microcontrollers with large RAM memory capacity to operate the matrix. The module is powered with the voltage of 5 V.
Features
- Resolution: 128x64
- Viewing angle: ≧ 140 °
- Control mode: synchronous control
- Frequency: ≧ 60 Hz
- Brightness: ≧ 1200 cd / m2
- Refresh rate: ≧ 19200 Hz to 3840 Hz
- Pixel pitch: 2 mm
- Voltage: 5V
- Average power consumption: <12 W / panel
- Dimensions: 256 x 128 mm
Kit contains
- 128x64 RGB LED P2 Panel
- IDC - IDC cable
- Power cord
584063
Data sheet
- Screen type
- LED Matrycowe
- Resolution
- 128 x 64 px
- Colour
- RGB
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
RGB LED matrix display with a resolution of 64 x 32 (2048 LED). DFRobot DFR0460
zł229.00
Delivery date unknown
No product available!
RGB LED matrix display with a resolution of 32 x 16 (512 LED). DFRobot DFR0471
zł82.88
24h
Available quantity: 2
Available
RGB LED matrix display with a resolution of 64x64 (4096 LED). It has cutouts at an angle of 45° to build an LED cube. Adafruit 5407
zł322.88
Delivery date unknown
No product available!
Other products in the same category (16)
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
Retired
No product available!
Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 30V and current in the range of 0 to 10A. Wanptek KPS3010D
Retired
No product available!
Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 30V and current in the range of 0 to 5A. Wanptek KPS305D
Retired
No product available!
Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 60V and current in the range of 0 to 5A. Wanptek KPS605D
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with Lightning connector. Allows you to charge the device and transfer data. eXtreme S15ULB
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with Lightning connector. Allows you to charge the device and transfer data. eXtreme S15ULW
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with US Type C connector. Allows you to charge the device and transfer data. eXtreme S15UCB
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with US Type C connector. Allows you to charge the device and transfer data. eXtreme S15UCW
Retired
No product available!
The eXtremestyle silicone cable (2m length) with micro USB connector. Allows you to charge the device and transfer data. eXtreme S20UMB
Retired
No product available!
The eXtremestyle silicone cable (2m length) with micro USB connector. Allows you to charge the device and transfer data. eXtreme S20UMW
Retired
No product available!
Board with ATmega32U4 and Atheros AR9331. It combines the advantages of a microcontroller and a microprocessor with Linux. The set has 32 KB flash memory, 20 digital inputs / outputs, including the ability to configure 7 as PWM channels and 12 as analog inputs (ATmega32U4) as well as a WiFi module and a microSD card slot (Atheros AR9331). Arduino Yún Rev2
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATA8520 SigFox module enabling the implementation of SigFox communication. Arduino MKR FOX 1200 ABX00014
Retired
No product available!
Board is a board with Atmel ATSAMW25 chip, the system has SAMD21 microcontroller (ARM, Cortex-M0+ core, 256 kB Flash, 8 KB SRAM) treated with 48 MHz clock. The ATSAMW25 chip also includes the WINC1500 Wi-Fi module. The user has at his disposal: 8 I/O lines, 12 PWM channels, 7 analog inputs. Arduino MKR1000 ABX00004
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the CMWX1ZZABZ module enabling the implementation of communication in Lo-Ra networks. Arduino MKR WAN1300 ABX00017
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATSAMD21 module and SARA-U201 U-blox enabling the implementation of communication in GSM networks. Arduino MKR GSM 1400 ABX00018
Retired
No product available!
Intelligent Wi-Fi plug. It automatically controls lighting, heating and any other connected electrical appliance. Shelly Plug S
Retired
No product available!
RGB LED matrix display with a resolution of 128x64 (8192 LED). modPan128x64