- Out-of-Stock
ArduCAM IMX219 Low Distortion IR Sensitive (NoIR) M12 Mount Camera - module with 8MP IMX219 camera for Raspberry Pi CM
ID: 586883
5906623403820
Module with 8 Mpx camera with IMX219 sensor and lens with 75° viewing angle. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0187
Description
Module with IMX219 sensor designed for use with Raspberry Pi Compute Module or Nvidia Jetson Nano. The sensor used has an 8 Mpx matrix and allows you to record video at resolutions 30fps @ 8MP, 60fps @ 1080p, 180fps @ 720p. The camera is equipped with a lens with a viewing angle of 75° with an M12 mount. It uses the MIPI CSI-2 interface specially designed to work with cameras. Can be used in drone, robot and 3D scanning applications.
Features
- Works with Raspberry Pi Compute Module or Nvidia Jetson Nano - not compatible with Raspberry Pi 3B, 3B+, 4B
- Matrix: IMX219
- Resolution: 8 Mpx
- Data format: 30fps @ 8MP, 60fps @ 1080p, 180fps @ 720p
- Optical size: 1/4 inch
- Viewing angle: 75 (H)
- EFL: 2.8 mm
- F.NO: 2.8
- Output interface: MIPI CSI-2 2-lane/4-lane
- Output formats: 8/10-bit RAW
- No IR filter
Kit contains
- Arducam IMX219 Camera Module with lens
- 15-pin FPC cable 15 cm
586883
Data sheet
- Resolution
- 8MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX219
- IR filter
- No
- Lens assembly
- M12
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
zł287.28
24h
Available quantity: 1
Available
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
zł199.00
24h
Available quantity: 3
Available
Base board prepared for Raspberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare Compute Module 4 PoE Board (B)
zł184.41
24h
Available quantity: 2
Available
8 Mpx camera module with IMX219 sensor and wide-angle "fisheye" lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0286
zł81.12
24h
Available quantity: 1
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł975.01
24h
Available quantity: 1
Available
Other products in the same category (16)
No product available!
No product available!
Printed circuit board for universal 9V power module. AVT1895 / 9 A
Retired
No product available!
No product available!
Premium Jumper Wire 50-Piece Rainbow Assortment M-M 12"
Retired
No product available!
No product available!
Permanent cylindrical neodymium magnet with a diameter of 5 mm and a height of 3 mm.
Retired
No product available!
HK Multiwii OLED Display Module I2C 128x64 Dot (MWC) (46373)
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
Adafruit 1030 - USB WiFi (802.11b/g/n) Module with Antenna for Raspberry Pi
Retired
No product available!
8-bit ST7 MCU, 8kB Flash, 384B RAM, 256B EEPROM, Lite Timer with Watchdog, Autoreload Timer with 32-MHz input clock, SPI, 10-bit ADC with Op-Amp, DIP20, RoHS
Retired
No product available!
An advanced 3D printer that offers unique printing capabilities. It supports a wide range of filaments, including PLA, PETG, TPU, ABS, as well as carbon fiber-reinforced polymers, ensuring a maximum hot end temperature of up to 300°C and a print speed of up to 500 mm/s. The device is equipped with advanced features such as Bambu Micro Lidar, a chamber monitoring camera and power loss recovery, making it an ideal solution for demanding industrial and hobby projects. Bambu Lab X1-Carbon 3D Printer
Retired
No product available!
No product available!
Module with 8 Mpx camera with IMX219 sensor and lens with 75° viewing angle. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0187