- Out-of-Stock

1.75 mm PLA filament for 3D printing by ROSA3D. 3 kg of filament is wound on the spool. The recommended printing temperature is in the range of 190°C to 230°C, and the temperature of the bed during printing in the range of 50°C to 70°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament.
The PLA Plus ProSpeed series is dedicated to the industry. It is perfect for continuous printing, taking many hours, where there is a need to print at high speed.
The PLA Plus ProSpeed filament offers better mechanical and temperature resistance than PLA Starter. The impact strength measured by the Izod method is almost 1.5 times higher than that of standard ABS, and after crystallization - more than twice as high. The filament is made of biodegradable biopolymer and is an alternative to styrene-based materials. PLA Plus ProSpeed provides excellent print quality, good adhesion to the print bed, less warping and no irritating smell. It was made of ingredients approved for contact with food.
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
3D printer with two extruder and a heated table. It is fully assembled and ready to use. Flashforge Creator Pro 2
No product available!
No product available!
No product available!
No product available!
No product available!
Arduino Yun Mini is a breadboard PCB developed with ATmega 32u4 MCU and QCA MIPS 24K SoC CPU operating up to 400 MHz. Qualcomm Atheros CPU supports a Linux distribution based on OpenWRT named Linino. The board has built- in WiFi, supports 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connector, an ICSP header, two reset buttons and one user button.
No product available!
Female terminal block, angled, 2-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-2P
No product available!
No product available!
No product available!
Raspberry Pi 2 and Pi 1 model B+ Enclosure - Clear
No product available!
The module with the ACS70331 current sensor with a direct current measuring range up to 2,5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020652
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 3 kg of 1.75 mm filament is wound on the spool. ROSA3D PLA Plus ProSpeed White