- Out-of-Stock
Filament ROSA3D PET-G Standard 1.75mm Pure Green Transparent
ID: 587774
5907753130693
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Pure Green Transparent
Description
1.75 mm PET-G filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 220°C to 260°C, and the temperature of the bed during printing in the range of 60°C - 80°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PET-G Standard dedicated to people who deal with amateur and professional 3D prints. It will be used in the creation of prototypes and large-format prints.
Filament PET-G Standard from ROSA3D is characterized by the ease of printing comparable to PLA. The details are characterized by precise details, good adhesion to the work table, odorlessness and a low level of shrinkage. Printouts are distinguished by high chemical resistance. They can be sanded, drilled, sawn, sanded, cut and painted without compromising the structural integrity of the component. The PET-G Standard filament is made of raw materials that are approved for contact with food.
Features
- Color: Pure Green Transparent
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 260°C
- Bed temperature: 60°C to 80°C
- Density: 1.29 g/cm3
- Odorless: smell
- Elongation at tensile 5.5%
- Tensile strength (to break) 47 MPa
- Tensile modulus is 2980 MPa
- Impact strength according to the Izod method with a notch of 4.7 kJ/m2
- Vicat softening point 78 °C
- Net weight: 0.8 kg
587774
Data sheet
- Rodzaj filamentu
- PET-G
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Green
You might also like
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Regular pricezł3,704.21zł1,999.00
24h
Available quantity: 1
Available
Easy PET-G filament in gray with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Gray
zł75.01
24h
Available quantity: 2
Available
Easy PET-G filament in light green transparent with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Light Green Transparent
zł75.01
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł54.30
24h
Available quantity: 275
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł48.55
24h
Available quantity: 250
Available
Other products in the same category (16)
The LANBERG angled HDMI adapter allows you to connect in hard-to-reach places, supporting 4K resolution at 30 fps and transfer rates up to 10.2 Gbps. Gold-plated connectors and Audio Return Channel (ARC) function ensure a high-quality connection in a sleek black finish.
Retired
No product available!
Flexible Qwiic cord with a length of 165 mm. On one side it is terminated with a Qwiic female connector, and on the other side with single goldpin female connectors. SparkFun CAB-22726
Retired
No product available!
People recognition module with sensor from Useful Sensors Inc. It contains a camera and a chip with programmed algorithms that detect faces and return information via a simple I2C interface. SparkFun SEN-21231
Retired
No product available!
The adapter is a useful tool that expands the USB Type-C port on your phone with a 3.5 mm audio jack port, allowing you to simultaneously connect a power source and a speaker device. Compatible with devices without a headphone connector, allows charging with a current of 2 A and is easy to store. Akyga AK-AD-62
Retired
No product available!
1-meter long USB Type-C cable enabling fast data transmission and powering electronic devices with a USB C port, such as smartphones and Macbooks. It works in the USB 3.1 standard with speeds up to 5 Gb/s. Akyga AK-USB-25
Retired
No product available!
1-meter cable with a USB C plug, enabling data transmission between USB C and USB A devices and used as a charger tip, compatible with USB 3.1. Akyga AK-USB-15
Retired
No product available!
1.5-meter power extension cable with an IEC C13 plug and an IEC C5 connector, ideal for powering a home theater or as an extension for a laptop charger. Its high quality and length make it reliable even in hard-to-reach places. Akyga AK-NB-03A
Retired
No product available!
The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter
Retired
No product available!
An e-Paper display driver for the Raspberry Pi with the IT8951 chip, which provides smooth and efficient management of content display on e-Paper screens. It supports various communication interfaces, such as USB, SPI, and I80. Waveshare e-Paper Driver HAT
Retired
No product available!
Test probe tip with 500X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP500-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
Retired
No product available!
The 12V axial DC fan with dimensions of 80x80x15mm offers a capacity of 62.86m3/h at a speed of 3000 rpm. Made of thermoplastic, it operates at temperatures from -10°C to 70°C and is characterized by a low noise level of 34.7dBA. Sunon EE80151S1-000U-A99
Retired
No product available!
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Pico
Retired
No product available!
Serial port to Ethernet converter module based on the ESP32 series from Wireless-Tag. It integrates an optimized TCP/IP protocol stack and is characterized by extremely high performance, stability, versatility and reliability. WT32-ETH01-PIN
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in Ethernet port, USB, GPIO and 128 MB of SPI Flash memory. Waveshare Luckfox Pico Plus
Retired
No product available!
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Pure Green Transparent