zł971.80
Robot following the line (kit for self-assembly)
ID: 569332
zł25.92
Tax included
zł21.07 tax excl.
A self-assembly kit that allows you to build a work that follows the line (Linefollower). A set of all electronic and mechanical components needed for construction. A soldering iron will be needed for assembly. D2-5
Description
A self-assembly kit that allows you to build a work that follows the line (Linefollower). A set of all electronic and mechanical components needed for construction. A soldering iron will be needed for assembly.
Attention!
Batteries not included in the kit should be purchased separately.
Included
- The LM393 system
- DIP-8 stand
- 100 uF electrolytic capacitor (2 pieces)
- 10K Potentiometer (2 pieces)
- 51 Ω resistor (4 pieces)
- 1 kΩ resistor (2 pieces)
- 10Ω resistor (2 pieces)
- Photoresistor (2 pieces)
- Red 5mm LED (2 pieces)
- White LED 5 mm (2 pieces)
- Transistor TO-92 S8550 (2 pieces)
- Switch (1 piece)
- DC motor (2 pieces)
- Circle (2 pieces)
- Tire (2 pieces)
- The axis of the rack (2 pieces)
- Washer (4 pieces)
- Tee (4 pieces)
- Sprocket (2 pieces)
- Worm sprocket (2 pieces)
- Screw (4 pieces)
- Engine screw (4 pieces)
- Support screw
- Support nut
- The end nut of the support
- 6 mm wires (4 pieces)
- Container for 2 AA batteries (not pictured)
- PCB board
569332
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
With a celebrated reputation as an affordable, simple and fun-to-play DIY robot kit, the Insectbot breed has now evoled to its second generation: the Insectbot Hexa. KIT0090
zł246.98
24h
Available quantity: 1
Available
AA/LR6/R6 alkaline battery with 1.5V voltage. 6 pcs. GP15AU
zł12.90
24h
Available quantity: 6
Available
Other products in the same category (16)
Replacement sprockets set for the Zumo robot in white. The kit includes two drive sprockets and two idle sprockets. The gears fit both Zumo V1.2 and Zumo 32U4 robots. Pololu 3129
zł29.19
4 weeks
No product available!
A self-assembly kit that allows you to build a work that follows the line (Linefollower). A set of all electronic and mechanical components needed for construction. A soldering iron will be needed for assembly. D2-5
zł25.92
4 weeks
No product available!
A set with a support ball designed for the Balboa 32U4 robot. It allows you to transform the Balboa balancing robot chassis into a traditional platform with a differential and a support ball. Pololu 3272
zł44.86
4 weeks
No product available!
Robot chassis kit with support ball for Balboa 32U4 robot. The kit does not include motors, wheels and electronic components. Pololu 3573
zł157.27
4 weeks
No product available!
Empower your Romi robot to manipulate its surroundings with this robotic arm accessory kit! The kit contains everything you need to build the arm, including a micro gripper and three servos—one for controlling the height of the arm, one for controlling the tilt of the gripper, and one for actuating the gripper paddles themselves.
zł497.61
4 weeks
No product available!
A small size gripper driven by a servomotor with a movement range of 32 mm. It contains a special micro servo with an additional wire that gives access to its feedback, so you can track the actual position of the gripper blades. Polol 3551
zł137.45
4 weeks
No product available!
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148
zł182.58
24h
Available quantity: 2
Available
A set for building an educational robot based on the popular micro:bit module. It is intended for people over 8 years of age. It allows you to introduce a child to the world of robotics in a simple and friendly way. DFRobot ROB0147
zł835.70
24h
Available quantity: 2
Available
Multifunctional robot with 2WD chassis and controller in the form of a micro:bit educational module. It is a universal mobile platform that can track the line and find and avoid obstacles. Waveshare AlphaBot2 for micro:bit Acce Pack
zł405.88
4 weeks
No product available!
The robot can recognize the attitude in real time using an acceleration and gyroscope sensor, as well as achieve balance by controlling the motors to adjust the position. Terasic P0582
zł2,118.52
4 weeks
No product available!
Module with 5 balancing sensors for Balboa 32U4 balancing robot. Pololu 3577
zł29.32
24h
Available quantity: 2
Available
A multifunctional board with dimensions of 120 x 90 cm dedicated to the micro:Maqueen and micro:Maqueen Plus robots. It allows you to implement line tracking scenarios. DFRobot MBT0011
zł22.04
24h
Available quantity: 2
Available
Control board for the Balboa 32U4 robot. It is part of Balboa 32U4 Balancing Robot Kit. Pololu 3576
zł334.54
24h
Available quantity: 1
Available
A set for self-assembly of a robotic arm with four degrees of freedom (4DOF) equipped with MG90S servomechisms. The arm at the end has a small gripper which allows you to catch and carry small objects. The handle is controlled using a plate compatible with Arduino Uno or a module with potentiometers.
zł200.97
24h
Available quantity: 1
Available
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of Jetson Nano, expansion module with connectors, camera, motors, housing and a set of mounting screws. Waveshare JetBot AI Kit
zł2,232.09
4 weeks
No product available!
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
zł495.91
24h
Available quantity: 3
Available
A self-assembly kit that allows you to build a work that follows the line (Linefollower). A set of all electronic and mechanical components needed for construction. A soldering iron will be needed for assembly. D2-5