

Standard analog servo equipped with a plastic gear. Provides access to the feedback potentiometer through the fourth (green) wire, allowing direct measurement of the output angle. With this additional information, it is possible to determine when the servo has reached its target position, which enables more complex closed-loop control of the servo. A standard PWM modeling signal is used for control. The servo has a range of motion of approximately 180°. The recommended operating voltage is 6 V and at this voltage the servo has a speed of 0.16 s/60° and a torque of 6 kg*cm. The cable is about 30 cm long and is terminated with a standard 3-pin connector and an additional 1-pin connector with feedback information.
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685, RoHS
No product available!
The servo driver module is an extension intended for minicomputers Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +. Allows you to control 16 PWM channels. Waveshare 15275
No product available!
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
No product available!
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. SPT5435
No product available!
SpringRC SM-S4303R Continuous Rotation Servo
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. Pololu 3428
Power HD High-Torque Servo 1501MG
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. DS3230
Standard digital servo equipped with a metal gear. It is characterized by high torque and increased supply voltage (from 6 to 7.4 V). Pololu 3427
The Base Rotate Kit is perfect for rotating a large mass. It can easily support 10lbs of weight. It has five 6mm bearings to reduce the friction. It\'s injection molded from ultra strong ABS plastic. ROB0034
No product available!
A servo with standard sizes. At 6 V, it can generate a torque of up to 15.5 kg*cm. Additionally equipped with a potentiometer informing about the servo position. It has a standard 3-pin connector matching most popular modeling controllers and an additional servo position pin.
Standard analog servo equipped with a plastic gear. It is characterized by quite high durability and strength. SparkFun ROB-11884
No product available!
The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441
No product available!
Standard type servo fitted with a plastic gearbox. It is characterised by quite high durability and strength. SparkFun ROB-11883
No product available!
Standard analog servo equipped with a plastic gear. Adapted to continuous operation 360°. Pololu 3448
No product available!
HK HK-752MG Coreless Digital MG/BB Servo 28g / 6.3kg / 0.11s (23219)
No product available!
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3442