Hitec HS-422 - 180° analog standard servo
ID: 232822
zł191.55
Tax included
zł155.73 tax excl.
Standard analog servo equipped with a plastic gear. It is characterized by quite high durability and strength. SparkFun ROB-11884
Description
Standard analog servo equipped with a plastic gear. It is characterized by quite high durability and strength. A standard PWM modeling signal with a pulse range from 1100 to 1900 µs is used for control, which gives a range of movement of about 180°. The recommended operating voltage is 6 V and with this voltage the servo has a speed of 0.16 s/60° and a torque of 4.1 kg*cm. The servo shaft is based on two sleeve bearings, which significantly reduces friction. The cable is approximately 30 cm long and is terminated with a standard JR-style connector. The set with the servo includes a set of drag rings and mounting screws.
Features
- Servo type: analog
- Gear: plastic (nylon)
- Supply voltage 4.8 to 6 V
- Speed (no load)
- 4.8 V - 0.21 s/60°
- 6V - 0.16s/60°
- Torque:
- 4.8 V - 3.3 kg*cm
- 6 V - 4.1 kg*cm
- Cable length: 30 cm
- Current consumption: 150 mA (no load), 800 mA (maximum)
- Dimensions: 40.6 x 19.8 x 36.6 mm
- Weight: 45.5 g
Kit contains
- HS-422 Servo
- Circle Horn
- Double Arm Horn
- Single Arm (w/ Slide Bracket) Horn
- Four Point Horn
- 4 x Rubber Grommets
- 4 x 2x15mm Phillips Screw
- 4 x Brass Eyelets
232822
Data sheet
- Gear material
- Plastic
- Torque
- 4 kg-cm
- Rozmiar serwa (seria)
- Standard
- Prędkość kątowa
- 0,16 sek/60°
- Sprzężenie zwrotne
- Nie
- Praca ciągła 360°
- Nie
- Power supply voltage
- 4,8 - 6 V
- Weight
- 46 g
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Pololu 780 30 cm servo extension with two female JR connectors enables flexible connection of devices with 3-pin 2.54 mm pitch connectors. The twisted-wire construction reduces EMI interference, and compatibility with RC standards makes it suitable for modeling, robotics, and control systems.
zł23.68
Delivery date unknown
No product available!
The Pololu 785 60 cm servo extension with a flat cable and female JR connectors allows flexible connection of devices with 3-pin 2.54 mm pitch connectors. It facilitates the integration of RC systems, control modules, and sensors in robotic and modeling projects.
zł29.32
Delivery date unknown
No product available!
Servo Extension Cable 12" Male - Female
zł22.05
Delivery date unknown
No product available!
Plastic mount for standard servos ensures stable mounting of the servo to the housing. Pololu 3435
zł16.90
24h
Available quantity: 2
Available
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
zł32.66
24h
Available quantity: 1
Available
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
zł49.90
24h
Available quantity: 5
Available
Other products in the same category (16)
Standard digital servo equipped with a metal gear. It is characterized by high torque and increased supply voltage (from 6 to 7.4 V). Pololu 3427
zł413.85
24h
Available quantity: 1
Available
HK HK-752MG Coreless Digital MG/BB Servo 28g / 6.3kg / 0.11s (23219)
zł87.93
24h
Available quantity: 1
Available
Power HD High-Torque Servo 1501MG
zł111.73
24h
Available quantity: 1
Available
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3442
zł110.93
4 weeks
No product available!
The SM-S4303R Pololu 1248 servo, designed for continuous rotation, provides an easy drive implementation in robotic projects. It offers high torque and full compatibility with RC accessories and servo controllers. Ideal for building mobile platforms and autonomous vehicles.
zł108.88
24h
Available quantity: 1
Available
The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g
zł109.22
24h
Available quantity: 3
Available
Power HD Standard Servo 3001HB
zł76.20
24h
Available quantity: 3
Available
Standard 40 kg*cm programmable servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare ST3025 Servo
zł439.82
24h
Available quantity: 1
Available
Standard 20 kg*cm programmable servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare ST3215-HS Servo Motor
zł100.17
24h
Available quantity: 14
Available
Servomechanism SG5010, double-bearing, TowerPro, RoHS
zł21.76
24h
Available quantity: 8
Available
Waterproof servo with metal gearbox and aluminum housing. A standard PWM modeling signal is used for control. It offers torque up to 35 kg*cm. DFRobot SER0060
zł137.45
24h
Available quantity: 3
Available
CF35-12 is a high-precision servo mechanism with a 360° magnetic encoder, optimized for use in modern robotic designs. Its high torque, maintenance-free construction, and rich set of control features make it an ideal choice for walking robots, robotic arms, and mechatronic systems requiring high accuracy, smooth motion, and reliability.
zł291.46
4 weeks
No product available!
RSBL85-24 is a compact, high-performance servo mechanism designed for 24 V supply, offering high control precision and application versatility. The use of a magnetic encoder, steel gearbox, and CNC housing makes this servo ideal for advanced robotic applications, industrial automation, and mobile systems where durability, accuracy, and high dynamic performance are required.
zł1,033.31
4 weeks
No product available!
A servo with standard sizes. At 6 V, it can generate a torque of up to 15.5 kg*cm. Additionally equipped with a potentiometer informing about the servo position. It has a standard 3-pin connector matching most popular modeling controllers and an additional servo position pin.
zł175.05
24h
Available quantity: 2
Available
The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 53 oz-in (3.8 kg-cm), 40 g.
zł115.71
24h
Available quantity: 1
Available
Standard analog servo equipped with a plastic gear. Adapted to continuous operation 360°. Pololu 3448
zł161.25
4 weeks
No product available!
Standard analog servo equipped with a plastic gear. It is characterized by quite high durability and strength. SparkFun ROB-11884