FEETECH FS5103B-FB - 180 ° standard analog servo with feedback
ID: 573418
zł107.86
Tax included
zł87.69 tax excl.
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441
Description
Standard analog servo equipped with a plastic gear. Provides access to the feedback potentiometer through the fourth (green) wire, allowing direct measurement of the output angle. With this additional information, it is possible to determine when the servo has reached its target position, which enables more complex closed-loop control of the servo. A standard PWM modeling signal is used for control. The servo has a range of motion of approximately 180°. The recommended operating voltage is 6 V and at this voltage the servo has a speed of 0.16 s/60° and a torque of 3.8 kg*cm. The cable is about 30 cm long and is terminated with a standard 3-pin connector and an additional 1-pin connector with feedback information.
Features
- Supply voltage 4.8 to 6 V
- Speed (no load)
- 4.8V - 0.18s/60°
- 6V - 0.16s/60°
- Torque:
- 4.8 V - 3 kg*cm
- 6 V - 3.8 kg*cm
- Cable length: 30 cm
- Output with feedback information
- Plastic gear
- Dimensions: 40.8 x 20.1 x 38 mm
- Weight: 43 g
Kit contains
- FEETECH FS5103B-FB servo
- A set of horns and mounting elements
573418
Data sheet
- Gear material
- Plastic
- Torque
- 3,8 kg-cm
- Rozmiar serwa (seria)
- Standard
- Prędkość kątowa
- 0,16 sek/60°
- Sprzężenie zwrotne
- Tak
- Praca ciągła 360°
- Nie
- Power supply voltage
- 4,8 - 6 V
- Weight
- 43 g
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685, RoHS
zł77.64
24h
Available quantity: 1
Available
With this smart arduino digital servo shield and Dynamixel AX series servos, It\'s quite easy for you to drive multi servos with daisy chain connection with an Arduino board such as Arduino Uno, and build your robotic dog, hexapod with powerful servos. DRI0027
zł134.16
Delivery date unknown
No product available!
The servo driver module is an extension intended for minicomputers Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +. Allows you to control 16 PWM channels. Waveshare 15275
zł57.23
Delivery date unknown
No product available!
16-channel servo driver module with I2C interface based on the PCA9685 system. modPCA9685
zł31.89
Delivery date unknown
No product available!
Other products in the same category (16)
HK HK-752MG Coreless Digital MG/BB Servo 28g / 6.3kg / 0.11s (23219)
zł87.93
24h
Available quantity: 1
Available
Standard analog servo equipped with a plastic gear. It is characterized by quite high durability and strength. SparkFun ROB-11884
zł191.55
3 weeks
No product available!
The FS5115M is a standard-size analog servo from FEETECH that has an all-metal gear train and delivers extra-high torque normally associated with much more expensive or larger servos. Servo horns and associated hardware are included. Pololu 3426
zł162.16
4 weeks
No product available!
The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g
zł109.22
24h
Available quantity: 3
Available
The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 53 oz-in (3.8 kg-cm), 40 g.
zł115.71
24h
Available quantity: 1
Available
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. Pololu 3428
zł412.54
24h
Available quantity: 1
Available
Standard digital servo equipped with a metal gear. It is characterized by high torque and increased supply voltage (from 6 to 7.4 V). Pololu 3427
zł413.85
24h
Available quantity: 1
Available
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441
zł107.86
4 weeks
No product available!
A servo with standard sizes. At 6 V, it can generate a torque of up to 15.5 kg*cm. Additionally equipped with a potentiometer informing about the servo position. It has a standard 3-pin connector matching most popular modeling controllers and an additional servo position pin.
zł169.69
24h
Available quantity: 2
Available
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. DS3225
zł114.92
24h
Available quantity: 2
Available
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. SPT5435
zł138.44
24h
Available quantity: 1
Available
Standard analog servo equipped with a plastic gear. Adapted to continuous operation 360°. Pololu 3448
zł161.25
4 weeks
No product available!
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3442
zł109.65
4 weeks
No product available!
Programmable standard 17kg * cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare SC15 Servo
zł81.67
24h
Available quantity: 10
Available
Programmable standard 30 kg*cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare ST3215 Servo
zł106.96
24h
Available quantity: 14
Available
Waterproof servo with metal gearbox and aluminum housing. A standard PWM modeling signal is used for control. It offers torque up to 35 kg*cm. DFRobot SER0060
zł137.45
24h
Available quantity: 2
Available
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441