Pololu 3426 - FEETECH High-Torque Servo FS5115M
ID: 565142
zł108.45
Tax included
zł88.17 tax excl.
The FS5115M is a standard-size analog servo from FEETECH that has an all-metal gear train and delivers extra-high torque normally associated with much more expensive or larger servos. Servo horns and associated hardware are included. Pololu 3426
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Overview
The FS5115M is a standard-size analog servo from FEETECH that can deliver more than twice the torque of our standard-size servos with plastic gears thanks to its powerful motor and all-metal gear train (if you need even more torque than this, check out the larger FT5335M giant servo). The output shaft is supported by two ball bearings for reduced friction. The FS5115M works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 500 µs to 2500 µs, and it has a 12″ (30 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
Note that, as with most hobby servos, stalling or back-driving this servo can damage it. This servo can draw bursts of current in excess of 3 A at 6 V, so please make sure you have an appropriate power supply. For comparison, a typical standard-size servo might draw around an amp when straining.
Comparison to the Power HD 1501MG high-torque servo
This servo is a lower-cost alternative to the 1501MG from Power HD, which has nearly identical dimensions and similar performance. The two servos should be generally interchangeable for most applications
.
General specifications
- Digital?: N
- Speed @ 6V: 0.16 sec/60°
- Stall torque @ 6V: 15.5 kg·cm
- Speed @ 4.8V: 0.18 sec/60°
- Stall torque @ 4.8V: 14 kg·cm
- Lead length: 12 in
- Hardware included?: Y
Dimensions
- Size: 40.8 × 20.1 × 38 mm
- Weight: 58 g
565142
Data sheet
- Gear material
- Metal
- Torque
- 15,5 kg-cm
- Rozmiar serwa (seria)
- Standard
- Prędkość kątowa
- 0,16 sek/60°
- Sprzężenie zwrotne
- Nie
- Praca ciągła 360°
- Nie
- Power supply voltage
- 4,8 - 6 V
- Weight
- 58 g
Other products in the same category (16)
Programmable standard 17kg * cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare SC15 Servo
zł90.42
24h
Available quantity: 15
Available
Standard analog servo equipped with a plastic gear. Adapted to continuous operation 360°. Pololu 3448
zł138.71
6 weeks
No product available!
Power HD High-Torque Servo 1501MG
zł119.20
24h
Available quantity: 1
Available
Servomechanism SG5010, double-bearing, TowerPro, RoHS
zł25.12
24h
Available quantity: 5
Available
Power HD Continuous Rotation Servo AR-3606HB
zł92.07
24h
Available quantity: 4
Available
Standard analog servo equipped with a plastic gear. It is characterized by high durability and strength. Pololu 1056
zł87.26
6 weeks
No product available!
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3442
zł86.64
24h
Available quantity: 2
Available
Standard analog servo equipped with a plastic gear. It is characterized by quite high durability and strength. SparkFun ROB-11884
zł191.55
4 weeks
No product available!
No product available!
A servo with standard sizes. At 6 V, it can generate a torque of up to 15.5 kg*cm. Additionally equipped with a potentiometer informing about the servo position. It has a standard 3-pin connector matching most popular modeling controllers and an additional servo position pin.
zł120.76
24h
Available quantity: 4
Available
Power HD Standard Servo 3001HB
zł81.28
24h
Available quantity: 3
Available
SpringRC SM-S4303R Continuous Rotation Servo
zł87.27
24h
Available quantity: 2
Available
The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g
zł77.86
24h
Available quantity: 2
Available
The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 53 oz-in (3.8 kg-cm), 40 g.
zł75.29
24h
Available quantity: 1
Available
The Base Rotate Kit is perfect for rotating a large mass. It can easily support 10lbs of weight. It has five 6mm bearings to reduce the friction. It\'s injection molded from ultra strong ABS plastic. ROB0034
zł224.84
4 weeks
No product available!
Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441
zł82.24
6 weeks
No product available!
The FS5115M is a standard-size analog servo from FEETECH that has an all-metal gear train and delivers extra-high torque normally associated with much more expensive or larger servos. Servo horns and associated hardware are included. Pololu 3426