![JETANK AI Kit - a set for building a tracked robot from NVIDIA Jetson Nano JETANK AI Kit - a set for building a tracked robot from NVIDIA Jetson Nano](https://kamami.pl/46105-large_default/jetank-ai-kit-a-set-for-building-a-tracked-robot-from-nvidia-jetson-nano.jpg)
![JETANK AI Kit - a set for building a tracked robot from NVIDIA Jetson Nano JETANK AI Kit - a set for building a tracked robot from NVIDIA Jetson Nano](https://kamami.pl/46105-large_default/jetank-ai-kit-a-set-for-building-a-tracked-robot-from-nvidia-jetson-nano.jpg)
zł1,787.78 tax excl.
A set for building a multi-tasking robot with a crawler chassis, based on the popular NVIDIA Jetson Nano development kit. Waveshare JETANK AI Kit
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A set for building a multitasking robot based on the popular NVIDIA Jetson Nano development kit. It consists of a minikomputer, tracked chassis, a robotic arm with 4 degrees of freedom, an 8 MP camera with a Sony IMX219 sensor, a WiFi Dual-Band 2.4/5 GHz wireless communication module and Bluetooth, and the necessary accessories.
Attention!
The undercarriage is a structure based on tracks with drive motors with a metal gear. 4 durable servos were used to build the robotic arm. The robot expansion board houses the motor controller, the servo power supply circuit and the protection circuit, and a basket for 3 18650 battery cells.
The set can be used to build a multi-purpose vehicle controlled by the included gamepad, computer or mobile device. The set is compatible with the libraries TensorFlow, OpenCV, TensorRT, Keras and DonkeyCar, i.e. a platform using neural networks and deep learning mechanisms that, with the support of Keras, TensorFlow and OpenCV, allows you to build your own autonomous vehicle.
Full documentation and assembly instructions are available on the product Wiki page.
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 3000 mAh. Samsung INR18650-30Q
A set of accessories for building a multi-tasking robot with a crawler chassis, based on the popular NVIDIA Jetson Nano development kit. Waveshare JETANK AI Kit Acce
No product available!
No product available!
DC motor with a two-sided shaft with built-in 48: 1 gearbox.
An upgraded version of Pololu\'s popular mobile robot. It is based on the Raspberry Pi RP2040 microcontroller and features an OLED display and a set of sensors. The assembled version. Pololu 5001
A set for building a vehicle powered by a DC motor with a propeller. Four-wheel design, powered by two 1.5V AA batteries
No product available!
Motor with 25 mm diameter and 46 mm length, 12 V operating voltage, 0,15 A to 5,6 A power consumption, 10200 RPM speed, 0,4 maximum torque and 48 CPR encoder. Pololu 4840
No product available!
A set for building a balancing robot. It has a board with an ATmega 32u4 microcontroller, engine controllers, modules with quadrature encoders and an IMU system (gyroscope, accelerometer, magnetometer). Pololu 3575
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2268
No product available!
Motor with 25 mm diameter and 52 mm length, 34:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 290 RPM speed and 8,5 maximum torque. Pololu 3204
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.5 V, and draws a current of 1 A per coil. Pololu 2298
No product available!
A pair of 66x10mm silicone tires compatible with Pololu 80×10mm/90×10mm wheels. Pololu 3410
No product available!
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148
Mini DC motor with permanent magnets with a rotation speed of up to 18,000 rpm. In a housing 130 with a 2 mm shaft
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Gray
No product available!
Motor with 25 mm diameter and 69 mm length, 99:1 metal gear, 6 V operating voltage, 0,55 A to 6,5 A power consumption, 97 RPM speed, 15 maximum torque and 48 CPR encoder. Pololu 4807
A set for building a multi-tasking robot with a crawler chassis, based on the popular NVIDIA Jetson Nano development kit. Waveshare JETANK AI Kit