Stacja Lutownicza na gorące powietrze/grotowa WEP 992D 75W ze statywem
search
  • Stacja Lutownicza na gorące powietrze/grotowa WEP 992D 75W ze statywem
ID: 575819
5906623435531
zł705.12
Tax included

zł573.27 tax excl.

Soldering station 2 in 1 for hot air and arrowhead. With original Japanese heating elements Hakko and PID controller correcting the temperature on an ongoing basis.

24h
Available
Available quantity: 2
 

Free shipping

free shipping in Poland for all orders over 500 PLN

 

Same day shipping

If your payment will be credited to our account by 11:00

 

14 days for return

Each consumer can return the purchased goods within 14 days

Description

WEP 992D is a 2in1 soldering station that connects a hot air soldering iron with a soldering iron. The station is equipped with an advanced PID controller correcting the temperature every 20 ms, allowing to obtain a stable temperature, even when soldering large parts with a soldering iron. Original Japanese Hakko heating elements make the soldering iron warm up in less than 1 minute. The station is equipped with a readable LCD display showing the current temperature of the soldering irons and the power of the blow. The temperature can be set using the buttons, while the power of the blast is put in a convenient potentiometer. The soldering iron is equipped with an automatic cooling function when the soldering iron is not used, in the case of a hot air soldering iron the breaker is in the handle, so after the soldering iron is automatically cooled, in the case of a soldering iron you can set the time after which the soldering iron cools down to 200 ºC , which significantly extends the life of the heater. The built-in error control system will inform the user through a message on the display in the event of a short circuit, overloading of circuits or failure to achieve the desired temperature. A wide range of available tips allows soldering not only leaded components, but also SMD in housings such as QFP, SOIC or PLCC, while a hot air solder compatible with many nozzles will work perfectly when soldering components in more demanding cases such as BGA.

Specification

  • PID controller correcting the temperature every 20 ms
  • Microprocessor control of parameters: temperature, power of blowing, working time
  • Compact design with a legible LCD display
  • Temperature display mode ° F / ° C
  • Properties of the hot air soldering iron
    • Air flow source: fan built into the flask
    • Air flow: up to 120 l / min
    • Temperature range: 100-480 ° C
    • Temperature stability: 1 ° C
    • Cable length: 100 cm
    • Protection against reaching too high temperature and alerting
    • Automatic cooling mode of the flask after putting it back in the holder
    • Displays the real power of the blow
  • Properties of the soldering iron
    • Temperature range: 200 - 480 ° C
    • Temperature stability: 1 ° C
    • Heating power: 75 W
    • The original Hakko heating element of Japanese production
    • Earth resistance below 2 ohms
    • Potential relative to ground below 2 mV
    • System: ESD safe
    • The length of the flask wire: 100 cm
    • Sleep mode: switched on after idle operation 0-99 minutes (value 0 disables the function)

Included

  • WEP 992D soldering station
  • Hotair holder
  • Tripod on the hotair flask
  • A set of nozzles:
    • Round nozzle with a diameter of 4.4 mm 1130
    • Round nozzle with a diameter of 7 mm 1196
    • Round nozzle with a diameter of 9 mm 1197
    • Square nozzle 12x12 mm 1313
  • Stand for the tipped flask with cleaning sponge and cleaner
  • Graduated flask 907I with T-B conical grip
  • Gripper for lifting systems
  • Power cord
575819

Data sheet

Station type
2in1 (tip soldering iron + hotair)
Tip soldering iron temperature
200 - 480 °C
HotAir temperature
100 - 480 °C
Power
75 W

You might also like

Other products in the same category (16)