- New
VL806 SuperSpeed USB 3.0 Host Controller – 2-port PCIe USB 3.0 controller
ID: 583859
5902186329669
zł19.68
Tax included
zł16.00 tax excl.
VL806 is a compact USB 3.0 controller for integration into systems with a PCIe interface, providing fast data transfer, high device compatibility, and low power consumption. It is suitable for desktop computers, embedded systems, and expansion cards requiring stable and efficient communication with USB devices.
Description
The VL806 controller from VIA Labs is a high-performance USB 3.0 host that adds two SuperSpeed (5 Gb/s) ports to platforms equipped with a PCI Express interface. It supports all USB operation modes – SuperSpeed (5 Gb/s), High-Speed (480 Mb/s), Full-Speed (12 Mb/s), and Low-Speed (1.5 Mb/s). With compliance to the USB 3.0 specification and the xHCI interface, the controller ensures seamless compatibility with both modern and legacy USB 2.0 and 1.1 devices.
The VL806 uses a PCIe 2.0 x1 interface, fully backward compatible with PCIe 1.0, making it suitable for both PCs and expansion cards. The integrated USB PHY technology based on a CMOS process minimizes power consumption, while UASP support enables faster and more efficient data transfers when using storage devices.
Properties
- 2 USB 3.0 SuperSpeed ports (5 Gb/s)
- USB mode support: High-Speed (480 Mb/s), Full-Speed (12 Mb/s), Low-Speed (1.5 Mb/s)
- PCI Express 2.0 x1 interface, backward compatible with PCIe 1.0
- Compliant with xHCI and fully compatible with Windows and Linux systems
- Legacy USB support
- USB Attached SCSI Protocol (UASP) support
- Device charging support according to Battery Charging Specification
- Firmware upgradeable via BIOS
- Power-efficient CMOS architecture
583859
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (13)
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 15V. PDC004
zł6.05
4 weeks
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 20V. PDC004
zł6.49
24h
Available quantity: 40
Available
FE1.1s is a compact and energy-efficient USB 2.0 hub controller, designed for integration into devices requiring support for multiple USB ports while maintaining high stability and low implementation costs.
zł4.90
24h
Available quantity: 99
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and USB typ A output. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł38.41
4 weeks
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 15 V or 20 V and testing chargers. PDC005
zł20.73
24h
Available quantity: 1
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output on a 5.08 mm ARK screw connector. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł29.50
24h
Available quantity: 13
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 9V. PDC004
zł9.05
24h
Available quantity: 10
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł49.90
4 weeks
No product available!
Module with the HUSB238 chip, which allows for flexible configuration of the voltage and current supplied through the USB PD port. It allows both manual setting of parameters using jumpers and dynamic control via the I2C bus. Equipped with a USB Type C connector. Adafruit 5807
zł28.63
24h
Available quantity: 16
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and a USB type A output. It enables powering devices with 15 V or 20 V and testing chargers. PDC005
zł25.95
24h
Available quantity: 16
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 12V. PDC004
zł7.02
24h
Available quantity: 28
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and a USB type A output. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
zł24.80
4 weeks
No product available!
Power module with a USB Type-C connector based on the STUSB4500 system. It enables powering devices with voltages ranging from 5 V to 20 V and currents up to 5 A. Configuration via the I2C interface. SparkFun DEV-15801
zł149.90
24h
Available quantity: 1
Available
VL806 is a compact USB 3.0 controller for integration into systems with a PCIe interface, providing fast data transfer, high device compatibility, and low power consumption. It is suitable for desktop computers, embedded systems, and expansion cards requiring stable and efficient communication with USB devices.