![ItsyBitsy M4 Express - ATSAMD51 microcontroller board ItsyBitsy M4 Express - ATSAMD51 microcontroller board](https://kamami.pl/32121-large_default/itsybitsy-m4-express-atsamd51-microcontroller-board-adafruit-3800.jpg)
![ItsyBitsy M4 Express - ATSAMD51 microcontroller board ItsyBitsy M4 Express - ATSAMD51 microcontroller board](https://kamami.pl/32121-large_default/itsybitsy-m4-express-atsamd51-microcontroller-board-adafruit-3800.jpg)
zł72.65 tax excl.
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Development kit equipped with ATSAMD51G19 microcontroller with ARM Cortex-M4 core operating at frequency up to 120 MHz. On the board, the user will find a 3.3 V voltage regulator, Reset buttons, RGB DotStar diode, microUSB connector for powering and programming the module and 23 GPIO outputs, on which such peripherals as 12-bit ADC inputs, DAC outputs, 18 PWM outputs, six SERCOM interfaces (I2C, UART, SPI) and an 8-bit parallel interface for camera operation (video inputs). The platform supports the CircuitPython and Arduino IDE programming environments. Programs can be loaded to memory via USB interface using the built-in UF2 bootloader. Full documentation with examples is available on the product page.
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4888
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
No product available!
Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3727
No product available!
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. SparkFun WRL-15836
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
Development board equipped with ATSAMD21G18 microcontroller. It has 30 I/O lines, including SERCOM interfaces and 14 analog inputs. Compatible with Arduino. SparkFun DEV-13672
Educational kit for learning TinyML. It consists of the Wio Terminal module, Grove sensors and the course. Seeed Studio 114992774
Board with SAMD21 microcontroller with CortexM0 + core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Module with headers. Arduino ABX00032
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3010
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
Evaluation board with ATSAMD21 microcontroller with ARM Cortex M0 core. Equipped with motion, temperature, light, sound sensors and RGB diodes. Can be programmed in MakeCode, CircuitPython, Arduino IDE or CS Discoveries. Adafruit 3333
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, communication interfaces and RGB diode. Adafruit 3382
The Wio Helium Monitor is a plug-and-play LongFi hotspot monitor for the Helium network. It allows you to determine whether a device is connected to the local area network (LAN) and whether it has access to the Internet. With Grove-Wio-E5 and an activated Watchium Silver/Gold subscription, you can also check that LoRaWAN communication with the hotspot (including Witness) is working correctly. Seeed Studio 114992990
Development kit with ATSAMD21E microcontroller with ARM Cortex M0+ core. The chip can be clocked at 48 MHz, has a built-in 256 KB of Flash memory and 32 KB of SRAM. The module has a Qwiic connector. SparkFun DEV-15423
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857