

Development kit equipped with ATSAMD21G18 microcontroller with ARM Cortex-M0 core operating at frequency up to 48 MHz. On the board, the user will find a 3.3 V and 5 V voltage stabilizer, a reset button, a microUSB connector for powering and programming the module, and 25 GPIO outputs, on which such peripherals as ADC inputs, DAC output, PWM outputs and I2C communication interfaces are derived, UART and SPI. The platform can be programmed using the Arduino IDE. The code can be uploaded to the memory via the USB interface using the built-in UF2 bootloader or via the SWD interface. The board can be powered via the USB connector or the DC socket with the voltage from 6 to 24 V.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Blue USB 3.0 A cable - microUSB 3.0 B with 1m length, allowing SuperSpeed transmission (up to 5Gbit / s = 625MB / s)
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
Module with ATmega4808 microcontroller from AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has 14 I / O lines, 6 PWM channels, 8 analog inputs.
No product available!
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
No product available!
DFRobot DFR0355 is a versatile development board that combines GSM, GPRS, and GPS functions into one compact device. With the ATmega32u4 microcontroller and integrated SIM808 module, this board is ideal for applications such as vehicle tracking, remote communication, satellite positioning, and IoT projects. Built-in power-saving features and battery power make it an excellent choice for applications requiring low power consumption and reliable operation in various conditions. DFRobot DFR0355
Development board with ATmega4809 microcontroller and Microchip ECC608 cryptographic chip. It is equipped with 6 analog input pins, 14 digital inputs/outputs (5 as PWM output) and Grove ports. Seeed Studio 102010288
No product available!
Module with ATmega328 microcontroller from the AVR family (32 kB Flash, 2 kB SRAM, 1 kB EEPROM). The module has 14 I/O lines, 6 PWM channels, 8 analog inputs
No product available!
Development board with NXP iMX RT1011 processor with ARM Cortex M7 core equipped with AirLift WiFi module. It has Arduino UNO compatible connectors and a STEMMA QT connector for I2C devices. Adafruit 4950
No product available!
Microcontroller board based on the ATmega328
Small evaluation board based on the ATmega328, RoHS
Board compatible with Arduino, equipped with the ATmega32U4 microcontroller
A miniature development board with ATtiny85 microcontroller, on which 6 I / O pins were derived. The module is supported by Arduino IDE. modATT85
Board with Atmel ATmega328P microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
No product available!
Virtual keyboard module in the form of a small flash drive. It allows you to simulate the keyboard after uploading the appropriate software and pressing a combination of buttons on the computer.
With Maker Uno RP2040, we bring the power of the RP2040 chip into the familiar Uno form factor. We maintain the user-friendly nature and plug-and-play features that have contributed to the popularity of the Arduino platform, while utilizing the advanced capabilities of the RP2040 to enhance its performance. Additionally, this board has been enriched with Maker series features that support the learning process and spark creativity. Cytron MAKER-UNO-RP2040
Microcontroller board based on the ATmega32u4
No product available!
Compact microcontroller board with an ATmega32U4 chip that integrates with USB to act as a HID device such as a keyboard or mouse. It operates at 5V at 16MHz, offering 20 digital I/O lines, of which 7 support PWM and 12 act as analog inputs.
Development board with ATmega328P microcontroller equipped with 14 I/O lines, 6 PWM channels, 6 analog inputs and FT231X chip. Compatible with Arduino UNO Rev3. Cytron CT-SE
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819