

zł299.53 tax excl.
The Wio Helium Monitor is a plug-and-play LongFi hotspot monitor for the Helium network. It allows you to determine whether a device is connected to the local area network (LAN) and whether it has access to the Internet. With Grove-Wio-E5 and an activated Watchium Silver/Gold subscription, you can also check that LoRaWAN communication with the hotspot (including Witness) is working correctly. Seeed Studio 114992990
The Wio Helium Monitor is a plug-and-play LongFi hotspot monitor for the Helium network. It allows you to determine whether a device is connected to the local area network (LAN) and whether it has access to the Internet. With Grove-Wio-E5 and an activated Watchium Silver/Gold subscription, you can also check that LoRaWAN communication with the hotspot (including Witness) is working correctly. If there are problems with Internet/LAN communication, it will report the problem via LoRaWAN, while other hotspots in the vicinity will be able to communicate with it.
The monitor reports information locally and remotely using the Watchium app. A free Watchium account is sufficient to monitor the LAN/Internet connection. The Silver (1HNT) / Gold (3HNT) version is required for additional LoRaWan options.
The Wio Terminal is an ATSAMD51-based development kit with wireless connectivity supported by the Realtek RTL8720DN. The processor runs at 120 MHz (up to 200 MHz) and has 4 MB of Flash memory. The Realtek RTL8720DN chip supports both Bluetooth and Wi-Fi, providing communication for IoT projects. The Wio Terminal is equipped with a 2.4-inch LCD screen, built-in IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared (IR 940nm) emitter. In addition, it also has two multi-function Grove ports and a 40-pin GPIO connector compatible with Raspberry Pi.
Wio Terminal
Grove - Wio-E5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Power supply module with a 650 mAh battery for the Wio Terminal set. Seeed Studio 103990564
LoRaWan and LongFi network monitor. It allows you to specify the number of hotspots to extend the actual network coverage. Seeed Studio 114992777
Development kit with ATSAMD21E microcontroller with ARM Cortex M0+ core. The chip can be clocked at 48 MHz, has a built-in 256 KB of Flash memory and 32 KB of SRAM. The module has a Qwiic connector. SparkFun DEV-15423
The board is equipped with ATSAME51 microcontroller (ARM Cortex-M core) with CAN bus and SPI Flash memory, GPIO pins and a connector for connecting the battery with the charging circuit. Adafruit 4759
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3505
Adafruit EdgeBadge is a board compatible with the TensorFlow Lite machine learning platform, allowing, among others, for speech recognition. The platform is based on the ATSAMD51J19 microcontroller. Adafruit 4400
No product available!
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3727
No product available!
Educational kit for learning TinyML. It consists of the Wio Terminal module, Grove sensors and the course. Seeed Studio 114992774
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
No product available!
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 22 I/O lines, 12 PWM channels, micro-USB. The module has a built-in SD connector with dedicated SPI (SPI1) interfaces that allow you to play music files. Arduino MKR Zero ABX00012
No product available!
Board with SAMD21 microcontroller with Cortex M0+ core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Arduino ABX00027
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3061
No product available!
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
No product available!
Development board equipped with ATSAMD21G18 microcontroller. It has 30 I/O lines, including SERCOM interfaces and 14 analog inputs. Compatible with Arduino. SparkFun DEV-13672
The Wio Helium Monitor is a plug-and-play LongFi hotspot monitor for the Helium network. It allows you to determine whether a device is connected to the local area network (LAN) and whether it has access to the Internet. With Grove-Wio-E5 and an activated Watchium Silver/Gold subscription, you can also check that LoRaWAN communication with the hotspot (including Witness) is working correctly. Seeed Studio 114992990