Adafruit EdgeBadge - board with ATSAMD51J19 microcontroller with TensorFlow Lite support
ID: 576968
5906623470174
zł235.13
Tax included
zł191.16 tax excl.
Adafruit EdgeBadge is a board compatible with the TensorFlow Lite machine learning platform, allowing, among others, for speech recognition. The platform is based on the ATSAMD51J19 microcontroller. Adafruit 4400
Description
Adafruit EdgeBadge is a board compatible with the TensorFlow Lite machine learning platform, allowing, among others, for speech recognition. The platform is based on the ATSAMD51J19 microcontroller with ARM Cortex-M4F core, operating at 120 MHz, equipped with 512 kB flash memory and 192 kB RAM, the board also has an additional 2 MB FLASH memory with SPI interface.
EgdeBadge is an improved version of pyBadge, a CircuitPython based arcade platform, so it's perfect as a portable console. The board can be programmed using MakeCode Arcade, CircuitPython and TensorFlow Lite for microcontrollers / Arduino.
Features
- Microcontroller: ATSAMD51J19
- Frequency: 120 MHz
- Core: Arm Cortex-M4F
- Flash memory: 512 KB
- RAM memory: 192 kB
- 2 MB SPI flash
- Display: 1.8 ”160x128 pixel color TFT
- 8 buttons with silicone pads
- 5 NeoPixel LEDs
- 3 axis accelerometer
- Light intensity sensor
- PDM microphone
- D-class mono driver 4-8Ω (2 W)
- Built-in battery charger
- Reset button
- Power button
576968
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
USB cable (type A) - microUSB (type B) used to connect the computer with devices equipped with microUSB-B sockets. Length: 1m
zł6.20
24h
Available quantity: 22
Available
Available
Li-Po battery 3.7V / 450mAh, PCM, connector 2 pins, cable length 150mm. Akyga LP403045
zł14.99
Delivery date unknown
No product available!
Li-Po battery 3.7V / 850mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP603048
zł23.69
Delivery date unknown
No product available!
Li-Po battery 3.7V / 980mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP573450
zł24.28
24h
Available quantity: 7
Available
Other products in the same category (16)
LoRaWan and LongFi network monitor. It allows you to specify the number of hotspots to extend the actual network coverage. Seeed Studio 114992777
zł585.41
24h
Available quantity: 1
Available
The board is equipped with the ATSAMD51J19 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins, connector for connecting the battery with the charging circuit. Adafruit 3857
zł119.31
24h
Available quantity: 1
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3505
zł141.63
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 1
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3727
zł61.36
24h
Available quantity: 1
Available
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05
24h
Available quantity: 1
Available
Evaluation board with ATSAMD21 microcontroller with ARM Cortex M0 core. Equipped with motion, temperature, light, sound sensors and RGB diodes. Can be programmed in MakeCode, CircuitPython, Arduino IDE or CS Discoveries. Adafruit 3333
zł126.16
24h
Available quantity: 1
Available
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, communication interfaces and RGB diode. Adafruit 3382
zł170.13
24h
Available quantity: 1
Available
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
zł171.87
3 weeks
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 22 I/O lines, 12 PWM channels, micro-USB. The module has a built-in SD connector with dedicated SPI (SPI1) interfaces that allow you to play music files. Arduino MKR Zero ABX00012
zł159.00
3 weeks
No product available!
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
zł37.99
24h
Available quantity: 4
Available
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857
zł90.28
24h
Available quantity: 1
Available
Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600
zł47.70
24h
Available quantity: 3
Available
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
zł62.39
4 weeks
No product available!
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
zł28.34
24h
Available quantity: 43
Available
Educational kit for learning TinyML. It consists of the Wio Terminal module, Grove sensors and the course. Seeed Studio 114992774
zł372.85
24h
Available quantity: 1
Available
Adafruit EdgeBadge is a board compatible with the TensorFlow Lite machine learning platform, allowing, among others, for speech recognition. The platform is based on the ATSAMD51J19 microcontroller. Adafruit 4400