Circuit Playground Express - evaluation board with ATSAMD21 microcontroller
ID: 565262
5906623469956
zł126.16
Tax included
zł102.57 tax excl.
Evaluation board with ATSAMD21 microcontroller with ARM Cortex M0 core. Equipped with motion, temperature, light, sound sensors and RGB diodes. Can be programmed in MakeCode, CircuitPython, Arduino IDE or CS Discoveries. Adafruit 3333
Description
An evaluation board with an ATSAMD21 microcontroller with an ARM Cortex M0 core that can operate at a frequency of up to 48 MHz. It is equipped with numerous sensors, including LIS3DH motion sensors, temperature (thermistor), light (photoresistor), sound (MEMS microphone) and 10 NeoPixel RGB diodes. In addition, the user has at his disposal a loudspeaker with an amplifier, IR receiver and transmitter, two buttons and a switch, as well as I2C and UART interfaces derived from external pads. The set is programmed via a micro USB connector using tools such as MakeCode, CircuitPython, Arduino IDE or CS Discoveries. Such a wide range of possibilities makes the set perfect for both beginners and more advanced users. Full documentation and a guide with examples are available on the product page.
Features
- 10 x mini NeoPixels
- Motion sensor (three-axis LIS3DH accelerometer with knock detection, free fall detection)
- Temperature sensor (thermistor)
- Light sensor (phototransistor)
- Sound sensor (MEMS microphone)
- Mini speaker with class D amplifier (magnetic speaker / buzzer 7.5 mm)
- 2 x buttons A and B
- Slide switch
- IR receiver and transmitter
- 8 x I/O pins for alligator clips
- I2C, UART, 8 pins which can do analog inputs, multiple PWM outputs
- 7 pads can act as capacitive touch inputs and 1 as analog output
- Green power LED "ON"
- User red LED "# 13"
- Reset button
- ATSAMD21 ARM Cortex M0 processor, operating with a voltage of 3.3 V and 48 MHz
- 2MB SPI flash memory, mainly used with CircuitPython to store code and libraries
- MicroUSB port for programming and debugging
- The USB port can function as a serial port, keyboard, mouse, joystick or MIDI
565262
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Expansion module (output expander) dedicated to the Circuit Playground Express board. Controlled by the I2C interface, it provides an IO interface, PWM, audio outputs, LED driver, DC motors and a Darlington circuit. Adafruit 3093
zł166.86
24h
Available quantity: 1
Available
A set of 10 colored wires with 50 cm long crocodile clips.
zł12.34
24h
Available quantity: 50
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 10
Available
10-pin connection cable with a length of 20 cm, terminated with a male goldpin plug and alligator connectors
zł10.37
24h
Available quantity: 9
Available
10-pin connection cable with a length of 20 cm, terminated with a female goldpin plug and alligator connectors
zł12.09
24h
Available quantity: 1
Available
Other products in the same category (16)
The board is equipped with the ATSAMD51J19 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins, connector for connecting the battery with the charging circuit. Adafruit 3857
zł119.31
24h
Available quantity: 1
Available
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3061
zł206.07
4 weeks
No product available!
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
zł69.90
4 weeks
No product available!
Educational kit for learning TinyML. It consists of the Wio Terminal module, Grove sensors and the course. Seeed Studio 114992774
zł372.85
24h
Available quantity: 1
Available
The board is equipped with ATSAME51 microcontroller (ARM Cortex-M core) with CAN bus and SPI Flash memory, GPIO pins and a connector for connecting the battery with the charging circuit. Adafruit 4759
zł143.34
24h
Available quantity: 3
Available
Adafruit EdgeBadge is a board compatible with the TensorFlow Lite machine learning platform, allowing, among others, for speech recognition. The platform is based on the ATSAMD51J19 microcontroller. Adafruit 4400
zł235.13
4 weeks
No product available!
Board with SAMD21 microcontroller with CortexM0 + core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Module with headers. Arduino ABX00032
zł139.00
24h
Available quantity: 6
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3505
zł141.63
24h
Available quantity: 1
Available
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
zł62.39
4 weeks
No product available!
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
zł171.87
3 weeks
No product available!
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
zł26.01
24h
Available quantity: 119
Available
Development board equipped with ATSAMD21G18 microcontroller. It has 30 I/O lines, including SERCOM interfaces and 14 analog inputs. Compatible with Arduino. SparkFun DEV-13672
zł164.38
24h
Available quantity: 2
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 1
Available
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05
24h
Available quantity: 1
Available
The Wio Helium Monitor is a plug-and-play LongFi hotspot monitor for the Helium network. It allows you to determine whether a device is connected to the local area network (LAN) and whether it has access to the Internet. With Grove-Wio-E5 and an activated Watchium Silver/Gold subscription, you can also check that LoRaWAN communication with the hotspot (including Witness) is working correctly. Seeed Studio 114992990
Regular pricezł368.42zł274.91
24h
Available quantity: 2
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3727
zł61.36
24h
Available quantity: 1
Available
Evaluation board with ATSAMD21 microcontroller with ARM Cortex M0 core. Equipped with motion, temperature, light, sound sensors and RGB diodes. Can be programmed in MakeCode, CircuitPython, Arduino IDE or CS Discoveries. Adafruit 3333