CRICKIT - expansion module for Circuit Playground Express
ID: 571549
5906623470167
zł166.86
Tax included
zł135.66 tax excl.
Expansion module (output expander) dedicated to the Circuit Playground Express board. Controlled by the I2C interface, it provides an IO interface, PWM, audio outputs, LED driver, DC motors and a Darlington circuit. Adafruit 3093
Description
Expansion module (output expander) dedicated to the Circuit Playground Express board. It is equipped with a number of connectors that provide useful interfaces in robotics, including the control of DC motors, modeling servos, IO outputs, analog inputs, Darlington outputs and a NeoPixel LED driver and an audio output for connecting speakers with a power of up to 3 W. The module is connected to the evaluation board by means of screw spacers to the edge connector and communicates via the I2C interface. Power is supplied to the circuit via the DC 5V connector. Full documentation and a guide with examples is available on the product page.
Features
- 4 x servo control interface
- 2 x bidirectional brushed DC motor control, each with 1A current limit, with 8-bit PWM speed control
- 4 x high-current "Darlington" 500mA outputs (for solenoid valves, relays, large LEDs or stepper motor)
- 4 x capacitive touch sensors
- 8 x signal pins, digital inputs / outputs or analog inputs
- 1 x NeoPixel controller with 5V voltage level converter
- 1 x Class D speaker output, 4-8 ohms, 3 W audio amplifier
- Dimensions: 85 x 81 x 14.7 mm
Kit contains
- Adafruit CRICKIT module
- 6 x copper spacer
- 4 x rubber pad
- 12 x screw
571549
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Evaluation board with ATSAMD21 microcontroller with ARM Cortex M0 core. Equipped with motion, temperature, light, sound sensors and RGB diodes. Can be programmed in MakeCode, CircuitPython, Arduino IDE or CS Discoveries. Adafruit 3333
zł126.16
24h
Available quantity: 1
Available
A set of 10 colored wires with 50 cm long crocodile clips.
zł12.34
24h
Available quantity: 62
Available
Other products in the same category (16)
Module with a 1.5" black and white OLED display with a resolution of 128x128. Offers 16 gray levels and communicates via the I2C or SPI interface. Adafruit 4741
zł117.06
24h
Available quantity: 1
Available
Module with light sensor VEML7700. It allows you to measure the intensity in the range from 0 to 120 Klx. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5378
zł24.62
24h
Available quantity: 3
Available
Module with acceleration and rotational speed sensor based on the LSM6DSOX system. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4438
zł61.94
4 weeks
No product available!
Module with a temperature and humidity sensor based on the SHT40 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4885
zł28.40
24h
Available quantity: 5
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł79.42
24h
Available quantity: 2
Available
Hub with Qwiic connectors that allows you to connect several boards to the evaluation kit. There is no built-in control system, but only splits one connector into 3 more. SparkFun BOB-18012
zł10.50
24h
Available quantity: 4
Available
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
zł105.20
24h
Available quantity: 1
Available
Module with digital barometer BMP390. It enables pressure measurement from 300 to 1250 hPa and temperature from -40℃ to 85℃. Communicates via I2C or SPI. Adafruit 4816
zł56.09
24h
Available quantity: 2
Available
The module with the I2C controller based on the HT16K33 system. Dedicated to 14-segment displays. It is equipped with STEMMA QT connectors. Adafruit 1910
zł31.50
4 weeks
No product available!
Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681
zł23.10
4 weeks
No product available!
Module with audio amplifier and 8 Ω speaker with a power of 1 W. The board is equipped with a STEMMA connector. Adafruit 3885
zł31.91
4 weeks
No product available!
Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4831
zł24.55
24h
Available quantity: 4
Available
Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701
zł19.91
24h
Available quantity: 2
Available
Module with acceleration and rotational speed sensor based on the LSM6DSO32 chip. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4692
zł72.24
24h
Available quantity: 2
Available
Module with I2C driver based on the HT16K33 chip. Dedicated to 7-segment displays. It is equipped with STEMMA QT connectors. Adafruit 1271
zł53.95
24h
Available quantity: 2
Available
Module with a digital barometer LPS22. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4633
zł38.50
24h
Available quantity: 2
Available
Expansion module (output expander) dedicated to the Circuit Playground Express board. Controlled by the I2C interface, it provides an IO interface, PWM, audio outputs, LED driver, DC motors and a Darlington circuit. Adafruit 3093