ItsyBitsy M4 Express - ATSAMD51 microcontroller board
ID: 571803
5906623429769
zł90.28
Tax included
zł73.40 tax excl.
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857
Description
Development kit equipped with ATSAMD51G19 microcontroller with ARM Cortex-M4 core operating at frequency up to 120 MHz. On the board, the user will find a 3.3 V voltage regulator, Reset buttons, RGB DotStar diode, microUSB connector for powering and programming the module and 23 GPIO outputs, on which such peripherals as 12-bit ADC inputs, DAC outputs, 18 PWM outputs, six SERCOM interfaces (I2C, UART, SPI) and an 8-bit parallel interface for camera operation (video inputs). The platform supports the CircuitPython and Arduino IDE programming environments. Programs can be loaded to memory via USB interface using the built-in UF2 bootloader. Full documentation with examples is available on the product page.
Features
- ATSAMD51 32-bit microcontroller with Cortex M4 core, operating at 120 MHz
- Support for floating point calculations with Cortex M4 DSP instructions
- 512 kB flash, 192 kB RAM
- 2 MB SPI FLASH
- 3.3 V regulator
- Native USB support, with USB bootloader and debugging
- Built-in cryptographic engines with AES (256 bit), RNG, Pubkey controller
- 23 x GPIO:
- 12-bit D / A converter (A0 and A1)
- 12-bit ADC (7 analog pins)
- 6 x SERCOM - SPI, I2C and UART
- 18 x PWM outputs
- 8 bit controller for camera / video input
- Vhigh output pin providing higher voltage with VBAT or VUSB to control NeoPixels, servos and other devices with 5V logic
- General Purpose Red LED
- RGB LED DotStar
- Reset button
- Power supply: microUSB or external source (e.g. battery)
- Dimensions: 35.9 x 17.8 x 4.2 mm
Kit contains
- ItsyBitsy M4 Express
- Set of goldpin connectors
571803
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Blue USB 3.0 A cable - microUSB 3.0 B with 1m length, allowing SuperSpeed transmission (up to 5Gbit / s = 625MB / s)
zł13.36
24h
Available quantity: 11
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.21
24h
Available quantity: 31
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 16
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł3.49
24h
Available quantity: 19
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4888
zł52.18
24h
Available quantity: 2
Available
Other products in the same category (16)
Development board equipped with ATSAMD21G18 microcontroller. It has 30 I/O lines, including SERCOM interfaces and 14 analog inputs. Compatible with Arduino. SparkFun DEV-13672
zł164.38
24h
Available quantity: 2
Available
Development kit with ATSAMD21E microcontroller with ARM Cortex M0+ core. The chip can be clocked at 48 MHz, has a built-in 256 KB of Flash memory and 32 KB of SRAM. The module has a Qwiic connector. SparkFun DEV-15423
zł110.56
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 1
Available
Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3010
zł261.29
24h
Available quantity: 1
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3727
zł61.36
24h
Available quantity: 1
Available
Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600
zł47.70
24h
Available quantity: 3
Available
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, communication interfaces and RGB diode. Adafruit 3382
zł170.13
24h
Available quantity: 1
Available
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3061
zł206.07
4 weeks
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 22 I/O lines, 12 PWM channels, micro-USB. The module has a built-in SD connector with dedicated SPI (SPI1) interfaces that allow you to play music files. Arduino MKR Zero ABX00012
zł159.00
3 weeks
No product available!
Educational kit for learning TinyML. It consists of the Wio Terminal module, Grove sensors and the course. Seeed Studio 114992774
zł372.85
24h
Available quantity: 1
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
zł69.90
4 weeks
No product available!
Board with SAMD21 microcontroller with CortexM0 + core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Module with headers. Arduino ABX00032
zł139.00
24h
Available quantity: 8
Available
Board with SAMD21 microcontroller with Cortex M0+ core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Arduino ABX00027
zł129.00
24h
Available quantity: 10
Available
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
zł62.39
4 weeks
No product available!
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
zł171.87
3 weeks
No product available!
Adafruit EdgeBadge is a board compatible with the TensorFlow Lite machine learning platform, allowing, among others, for speech recognition. The platform is based on the ATSAMD51J19 microcontroller. Adafruit 4400
zł235.13
4 weeks
No product available!
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857