Adafruit ItsyBitsy RP2040 - board with RP2040 microcontroller
search
  • Adafruit ItsyBitsy RP2040 - board with RP2040 microcontroller
  • Adafruit ItsyBitsy RP2040 - board with RP2040 microcontroller
ID: 583887
5906623429998
€13.59
Tax included

€11.05 tax excl.

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4888

24h
Available
Available quantity: 2
Kamami is the official distributor of Adafruit modules and development kits. All boards of this brand in our offer are original and come directly from the manufacturer.

Description

Adafruit ItsyBitsy RP2040 is a board equipped with an RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0+ cores operating at a frequency of 133 MHz, 256 KB of RAM and 30 GPIO ports. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 4 MB connected via QSPI interface.

On the board, in addition to the RP2040 system and Flash memory, the user will find a 3.3 V voltage stabilizer, Boot and Reset buttons, LED and RGB NeoPixel diodes, a microUSB connector for powering and programming the module, and 23 GPIO outputs, on which such parameters as four 12-bit ADC inputs, 16 PWM outputs, two I2C, SPI and UART interfaces.

The platform supports the popular MicroPython and C/C++ programming languages. Programs can be loaded to the memory via the USB interface using the built-in UF2 bootloader or an external programmer via the SWD interface.

Features

  • RP2040 microcontroller designed by Raspberry Pi
    • Dual ARM Cortex-M0+ cores clocked up to 133 MHz
    • 264 kB of onboard SRAM
    • Real time clock (RTC)
  • Voltage regulator 3.3 V 500 mA
  • Built-in microUSB connector for programming with USB 1.1 operating in Host and Device modes
  • 23 x multi-functional GPIO pins
    • 4 x 12-bit ADC inputs with internal temperature sensor, 0.5 MSa/s
    • 16 PWM channels
    • 2 x UART
    • 2 x I2C
    • 2 x SPI
  • Reset and Boot buttons
  • LEDs and NeoPixel
  • SWD interface connector
  • 4 MB external flash memory
  • Supported programming languages: MicroPython and C/C++
  • Dimensions: 36 x 18 x 4 mm
583887

Data sheet

Microcontroller
RP2040
Flash memory
4 MB
Number of I/O
23
Ethernet
none
WiFi/BT module
No
Bluetooth module
No
MicroSD slot
No
Length
36mm
Width
18 mm
USB connector type
microUSB type B

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

You might also like

Other products in the same category (16)

Shopping Cart
No Product in Cart