Category: RETIRED PRODUCTS

Xmega eXploreGO module with ATXmega128A4U microcontroller (version without MP3). The module is equipped with in DataFlash memory, microSD card connector. MOD-20 / AZ

MOD-21.Z - push button module with bistable operation. The sensor operates based on the AT42QT1012 system.

The Raspberry Pi GPIO connector adapter allows you to output signals from Raspberry Pi to the contact plate. Two LEDs indicate +3.3V and +5V power supply

MOD-23.Z

MOD-25.Z - touch sensitive button module with monostable function. The sensor operates based on the AT42QT1011 system.

MOD-27.Z

MOD-13.Z is a module that allows you to safely and conveniently attach a microSD card to a project with an SPI interface. It has a built-in 74HC125 buffer. MOD-13

The module enables connection of two devices with I2C interface working with different voltage levels. MOD-28.Z

It is used to monitor the temperature measurement and other parameters. The expansion module has an I2C / 1-Wire converter (DS2482) through which DS18B20 temperature sensors can be connected using two or three wires. MOD-29.Z

Power module with IRFR4105Z transistor (MOD-30.Z), maximum current 2A, 5V power supply or 5V - 12V range (selection by jumper)

The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z

Universal module with LM358 operational amplifier. Depending on the additional elements installed, the amplifier can be freely configured, eg as a reversing, non-inverting amplifier, voltage follower or an integrating amplifier. MOD-32.Z

MOD-33 / AZ

The modally controlled modulation module MOD-34 / BZ allows wireless load control with a current consumption of up to 10A via a relay. Includes wireless module nRF24l01.

MOD-35.Due

MOD-36.Z

The SOIC adapter is used for testing circuits in SMD enclosures. The place for the stabilizer enables the selection of the supply voltage, as well as the supply of additional modules. The module is equipped with a filtering capacitor and space for a polymer fuse. MOD-14.Z

The module with the 74LVC245AD system allows connecting systems with different supply voltages. Bi-directional operation mode allows you to change the output to the input using a jumper or DIR input, without the need to disconnect the system. MOD-12.Z

32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-100

The converter enables simple connection of the project being built with the UART output to the computer via a USB interface. After connecting to a computer, a virtual COM port is created. MOD-05 / AZ