LoRa module operating at 433 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23233

1.5inch OLED display Module is an OLED display with I2C / SPI interface with 128x128 resolution, powered by 3.3-5V. Waveshare 1.5inch OLED Module

The controller enables to supply the motors with voltage in the range of 10-47V and power consumption in continuous operation of 1.7A (4.5A peak) for each channel in dual or 3.4A mode (9A peak) in single channel mode. Pololu 2999

Module with IPS LCD display with a diagonal of 1.8" and a resolution of 128x160 px. Equipped with a microSD card reader. DFRobot DFR0928

ISG1321 is an industrial camera module with a global shutter, wide field of view and high refresh rate, dedicated to vision systems, high-speed motion capture and inspection tasks. Equipped with a MIPI-CSI interface, it enables integration with modern computing platforms.

LED strip with COB diodes in green. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20

A compact relay module with an Omron G5LE-14-DC5 relay, capable of controlling loads up to 10 A with a 5 V coil voltage. Thanks to a BSS138K MOSFET transistor, it can be activated by a 2.5 V to 20 V logic signal, facilitating interoperability with microcontrollers. The module is equipped with 5 mm screw terminals, a 3-pin JST SH connector, and LEDs to indicate operation. Pololu 5662

Module with GNSS MAX-M10S receiver. It can receive signals from GPS, GLONASS, BeiDou and Galileo constellations. It has an SMA connector for connecting an external antenna and a Qwiic socket. SparkFun GPS-18037

Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810

The Modeling PWM Signal Mixer Module is a compact device that allows mixing of PWM signals in modeling, allowing for a variety of control of components such as guns, plates and motors. It can be precisely tailored to the user\'s needs and also offers flexibility in control priority settings.

White Cold LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection class IP65 (waterproof)

STM32U585CIT6, ARM Cortex-M33 core microcontroller, 2 MB Flash, 784 KB RAM, 160 MHz CPU, LQFP48

USB A-microB USB cable with a length of 1m, white-blue cable, flat, blue plugs illuminated with RGB diode

0.95inch RGB OLED, SPI interface, curved/horizontal pinheader

Pink LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection class IP65 (waterproof)

Module with 2-channel DC motor driver DRV8833 designed to work with the Raspberry Pi Pico. It can work with a voltage from 2.7 to 10.8 V and a current of up to 1.2 A. Pimoroni PIM617

Module with two white diodes. Dedicated to Voron 3D printers as hotend and printing nozzle lighting

Module with 5 A 250 VAC relay. DFRobot DFR0017

The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.