A connector that allows you to connect the cable to the existing installation without having to cut the cable. Suitable for wires with a cross-section of 0.5-1.5mm2

M12 mount lens included with adapter. 25 mm focal length and 20° FoV. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN036

Module with a passive buzzer. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020109

Module with a PIR motion sensor. It can detect movement up to 5 meters with a detection angle of 120 degrees

Two adapter boards with 2-pin back-entry JST SH connectors for single-shaft Pololu micro metal gearmotors. They provide a quick and reliable interface for power cables in compact electronic and robotic assemblies. Pololu 5096

The Lanberg USB-C to USB-A 2.0 Premium cable in blue, with a length of 0.5 m, supports charging up to 5A, ensuring efficient power delivery to devices. Its durable construction and high-quality materials guarantee reliable data transfer and stable charging. CA-USBO-21CU-0005-BL

UART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website. USR-K7

A switching converter that regulates 18V from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5587

GMS/GPRS 2G module operating in a wide frequency range of 850/900/1800/1900 MHz. It supports numerous protocols, including TCP, UDP, PPP, FTP, HTTP, SMTP, NITZ, PING, NTP, SSL, MQTT. Based on the latest MTK chipset, it is optimized for low-power IoT applications. Quectel M95FB

A module that allows you to connect four cameras to a Raspberry Pi. It supports cameras with MIPI interface with a resolution of 5 Mpx, 8 Mpx and 12 Mpx. Arducam B012001

USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a micro USB connector. Waveshare PL2303 USB UART Board (micro) V2

Distance measurement tester designed for HC-SR04 ultrasonic sensor. It is equipped with a 3-digit 7-segment LED display showing the current measurement and a measurement processing system with UART output

A step-down converter module that allows for input voltage reduction from 6.1–36V to a stable 6V level, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5594

A step-down converter module that allows for input voltage reduction from 7.6-36V to a stable 7.5V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5595

32-bit ARM Cortex-M0 microcontroller; 32 kB flash and 8 kB SRAM; 4 x 40 segment LCD driver, LQFP100, NXP

LCD 1x16, 122x33mm, FSTN NEGATIVE, LED backlight (blue), enhanced temperature range, RoHS

The Lanberg USB cable enables seamless communication between USB-C devices and computers via a USB-A port. Additionally, it supports Quick Charge 3.0 fast charging standard, ensuring efficient and reliable performance. CA-USBO-15CU-0018-BK