Arducam Multi Camera Adapter V2.2 module - MIPI splitter module
ID: 573401
5906623403110
zł269.67
Tax included
zł219.24 tax excl.
A module that allows you to connect four cameras to a Raspberry Pi. It supports cameras with MIPI interface with a resolution of 5 Mpx, 8 Mpx and 12 Mpx. Arducam B012001
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The latest version of the module that allows you to connect four cameras with MIPI interface to the Raspberry Pi. Works with 5 Mpx OV5647, 8 Mpx IMX219 and 12 Mpx IMX477 cameras. All connected cameras must be of the same type, it is not possible to connect one camera with an OV5647 sensor and the other with IMX219. Switching between cameras is done via three GPIO ports. The module cannot display images from several cameras at the same time. It is also not possible to combine several modules in order to increase the number of connected cameras. The module is compatible with Raspberry Pi 4B / 3B + / 3B microcomputers.
Features
- Accommodate 4 Raspberry Pi cameras on a single RPi board
- Support 5MP OV5647 / 8MP IMX219 / 12MP IMX477 camera for Raspberry Pi, no mixing allowed
- Support Raspberry Pi Model A/B/B+, Pi 2 and Raspberry Pi 4, 3,3b+.
- 3 GPIOs required for multiplexing
- Sequential switching of cameras, it is not possible to display the image from the cameras simultaneously
- Compatible with Raspberry Pi 4B / 3B + / 3B
Kit includes
- 1pcs Arducam Mini Multi-Camera Adapter Board
- 1pcs 60mm 15pin FPC cable
573401
You might also like
5MP Mini Camera OV5647 Sensor 1080p 720p video for Raspberry Pi official Board. ArduCAM B0033
zł39.90
24h
Available quantity: 5
Available
OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031
zł134.92
24h
Available quantity: 5
Available
OV5647 Camera Board /w CS mount Lens fully compatible with Raspberry Pi. ArduCAM B0032
zł180.05
24h
Available quantity: 5
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł221.40
24h
Available quantity: 298
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł265.90
24h
Available quantity: 33
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł362.90
24h
Available quantity: 97
Available
Set with HQ camera and 6 mm wide-angle lens. The set works with all versions of Raspberry Pi minicomputers with a CSI socket. ArduCAM B0240
zł340.98
24h
Available quantity: 3
Available
The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0152
zł399.14
24h
Available quantity: 1
Available
The camera module with the Sony IMX219 sensor with motorized IR filter. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0154
zł217.82
24h
Available quantity: 1
Available
Other products in the same category (16)
A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1129
zł9.90
24h
Available quantity: 294
Available
Flex Cable for Raspberry Pi Camera - 100mm / 4"
zł1.89
24h
Available quantity: 375
Available
The 15 cm long tape allows you to connect the camera to the Raspberry Pi Zero series. Waveshare RPi Zero V1.3 Camera Cable 15cm
zł10.28
24h
Available quantity: 20
Available
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).
zł44.90
24h
Available quantity: 504
Available
Case designed for ArduCAM cameras for Raspberry Pi. It is compatible with camera modules with dimensions of 25x24 mm. ArduCAM U6251
zł13.57
Delivery date unknown
No product available!
A set with a 2 DOF control platform for cameras designed for Raspberry Pi, Nvidia Jetson Nano and Xavier NX. It is based on two digital servos and dedicated board. ArduCAM B0283
zł204.38
24h
Available quantity: 2
Available
30 cm long tape, a knockout attempt for Raspberry Pi Zero series. Waveshare RPi Zero 2 W Camera Cable 30cm
zł10.44
24h
Available quantity: 41
Available
CAMDENBOSS CBRPC-CLR Dev Board Enclosure, Raspberry Pi Camera, Polystyrene, Transparent
zł64.00
6 weeks
No product available!
The adapter allows to extend the CSI / DSI interface using two FFC tapes (by connecting them in one tape). It allows you to connect the camera to a Raspberry Pi computer or a DSI display, for distances using two FFC tapes. Adafruit 3671
zł17.90
24h
Available quantity: 60
Available
Case designed for ArduCAM cameras for Raspberry Pi. It is compatible with camera modules with dimensions of 25x24 mm. ArduCAM U6270
zł10.84
24h
Available quantity: 12
Available
A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1128
zł6.03
24h
Available quantity: 371
Available
CSI-USB adapter designed for the Raspberry Pi HQ camera. It allows you to connect the camera via a USB interface to UVC compatible devices running under Linux, Windows, MacOS or Android. ArduCAM B0278
zł212.09
24h
Available quantity: 1
Available
Flex Cable for Raspberry Pi Camera - 200mm / 8"
zł1.91
24h
Available quantity: 330
Available
A small tripod with 1/4" mounting screw designed for Raspberry Pi HQ Camera. Pocket-sized and very lightweight, withstands loads up to 1kg. ArduCAM UB0216
zł50.65
24h
Available quantity: 2
Available
The control platform equipped with servos allows you to control the position of the camera in two dimensions. It has a built-in driver and light sensor. Waveshare Pan-Tilt HAT
zł77.56
24h
Available quantity: 1
Available
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
zł2.64
24h
Available quantity: 53
Available
A module that allows you to connect four cameras to a Raspberry Pi. It supports cameras with MIPI interface with a resolution of 5 Mpx, 8 Mpx and 12 Mpx. Arducam B012001