zł13.74 tax excl.
The adapter allows to extend the CSI / DSI interface using two FFC tapes (by connecting them in one tape). It allows you to connect the camera to a Raspberry Pi computer or a DSI display, for distances using two FFC tapes. Adafruit 3671
A small adapter that allows you to extend the CSI / DSI interface using two FFC tapes (by connecting them in one tape). It has two 15-pin connectors with 1.0 mm pitch, eg FFC / FPC tape for 30 cm Raspberry Pi camera . The adapter can be used to connect the camera to a Raspberry Pi computer or display with a DSI interface, for further distances using two FFC tapes. It should be remembered that the CSI / DSI interface has been designed for connections with a length of more than 25 cm, therefore there is no guarantee of operation on connections of longer lengths.
Manufacturer
Responsible person
The seven-inch touch screen for Raspberry Pi computers has a resolution of 800 x 480, and thanks to the frame and spacers, it is possible to create an integrated device, such as a control panel, based on Raspberry PI. RPI Raspberry Pi Display
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
No product available!
High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60, and 640x480p90 video
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
A small tripod with 1/4" mounting screw designed for Raspberry Pi HQ Camera. Pocket-sized and very lightweight, withstands loads up to 1kg. ArduCAM UB0216
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).
A set with a 2 DOF control platform for cameras designed for Raspberry Pi, Nvidia Jetson Nano and Xavier NX. It is based on two digital servos and dedicated board. ArduCAM B0283
No product available!
CSI-USB adapter designed for the Raspberry Pi HQ camera. It allows you to connect the camera via a USB interface to UVC compatible devices running under Linux, Windows, MacOS or Android. ArduCAM B0278
The 15 cm long tape allows you to connect the camera to the Raspberry Pi Zero series. Waveshare RPi Zero V1.3 Camera Cable 15cm
The control platform equipped with servos allows you to control the position of the camera in two dimensions. It has a built-in driver and light sensor. Waveshare Pan-Tilt HAT
Case designed for ArduCAM cameras for Raspberry Pi. It is compatible with camera modules with dimensions of 25x24 mm. ArduCAM U6251
A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1128
A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1129
A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1130
A tape enabling the connection of a DSI display with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on a Raspberry Pi 5 computer. Raspberry Pi SC1132
A tape enabling the connection of a DSI display with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on a Raspberry Pi 5 computer. Raspberry Pi SC1133
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm
No product available!
The Arducam CS to M12 adapter allows you to use M12 or CS lenses with the Raspberry Pi HQ camera module, providing a wide range of optical options. ArduCam UB0225
No product available!
The Arducam B0210 set includes three flexible ribbons with lengths of 38 mm, 73 mm, and 150 mm, designed for connecting camera modules to Raspberry Pi Zero and Zero 2W. Each ribbon features a 15-pin connector with a 1.0 mm pitch on one end and a 22-pin connector with a 0.5 mm pitch on the other, ensuring compatibility with official V1, V2, and HQ cameras, as well as most Arducam modules.
No product available!
The adapter allows to extend the CSI / DSI interface using two FFC tapes (by connecting them in one tape). It allows you to connect the camera to a Raspberry Pi computer or a DSI display, for distances using two FFC tapes. Adafruit 3671