Upgraded Camera Pan Tilt Platform - 2 DOF platform for cameras for Raspberry Pi and Jetson Nano/Xavier NX
ID: 585173
5906623403622
zł188.29
Tax included
zł153.08 tax excl.
A set with a 2 DOF control platform for cameras designed for Raspberry Pi, Nvidia Jetson Nano and Xavier NX. It is based on two digital servos and dedicated board. ArduCAM B0283
Description
A set with a 2 DOF control platform designed for minicomputers Raspberry Pi, Nvidia Jetson Nano and Xavier NX. The platform is based on two digital servos that allow you to control the position of the camera in two dimensions, making 180-degree movements horizontally and vertically. A dedicated board with a 12-bit PWM controller was used to control the servos, located in the lower base of the platform. Full documentation with assembly instructions is available on the product page.
Features
Digital Servo GH-S37D
- Torque: 0.6 kg/cm at 3.6V, 0.8 kg/cm at 4.8V
- Operating Speed: 0.13sec/60° at 3.6V, 0.09sec/60° at 4.8V
- Operating Voltage: 3.6v～4.8v
- Operating Current: ＜350mA
- Dead Band: 3 usec
- Dimension: 20 x 8.75 x 22mm
Control Board
- PWM resolution: 12-bit
- Communication interface: I2C
- Operating voltage: 3.3V/5V
- Dimension: 38 x 28 mm
Kit contains
- 2 x Digital servo
- A set of bracket elements and screws
- PWM control board
- 4 x F-F connection cable
- 2 x M-F connection cable
- Manual
585173
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 107
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 105
Available
A set with a 2 DOF control platform for cameras designed for Raspberry Pi, Nvidia Jetson Nano and Xavier NX. It is based on two digital servos and dedicated board. ArduCAM B0283
zł188.29
24h
Available quantity: 2
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,028.98
24h
Available quantity: 3
Available
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
zł1,689.00
24h
Available quantity: 30
Available
Other products in the same category (16)
The Arducam Mini Multi-Camera Adapter Board is an expander that can connect up to 4 ArduCam cameras. ArduCam B0074
zł92.24
4 weeks
No product available!
Base plate designed for Luxonis BW1099 DepthAI SoM modules. It has three interfaces for connecting cameras with a 26-pin connector. ArduCAM B0327
zł1,586.76
4 weeks
No product available!
A module that allows you to connect four cameras to a Raspberry Pi. It supports cameras with MIPI interface with a resolution of 5 Mpx, 8 Mpx and 12 Mpx. Arducam B012001
zł255.25
24h
Available quantity: 5
Available
A small tripod with 1/4" mounting screw designed for Raspberry Pi HQ Camera. Pocket-sized and very lightweight, withstands loads up to 1kg. ArduCAM UB0216
zł51.13
24h
Available quantity: 1
Available
The control platform equipped with servos allows you to control the position of the camera in two dimensions. It has a built-in driver and light sensor. Waveshare Pan-Tilt HAT
zł71.73
24h
Available quantity: 4
Available
ArduCam CSI to HDMI modules are designed to work with cameras: Raspberry Pi V1 and Raspberry Camera V2. ArduCAM CSI to HDMI allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters). Arducam B0091
zł61.38
4 weeks
No product available!
30 cm long tape, a knockout attempt for Raspberry Pi Zero series. Waveshare RPi Zero 2 W Camera Cable 30cm
zł9.52
24h
Available quantity: 24
Available
A set of metal handles to build a platform powered by micro servos. It allows you to create a movable stand, e.g. for a camera. SparkFun ROB-10335
zł33.62
3 weeks
No product available!
Locking ring for M12 mount lenses. Arducam U6136
zł1.57
24h
Available quantity: 15
Available
Available
Expansion module for the OpenMV Cam M7 camera. The board has connectors compatible with the Gravity standard. It has digital, analog, serial and I2C pins. DFRobot DFR0578
zł23.21
24h
Available quantity: 2
Available
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095
zł335.14
24h
Available quantity: 1
Available
300mm ArduCam extension cable. Compatible e.g. with IMX219 image sensor. ArduCam B0186
zł77.70
4 weeks
No product available!
Flex Cable for Raspberry Pi Camera - 300mm / 12"
zł4.31
24h
Available quantity: 88
Available
Camera module with a two-degree-of-freedom (2 DoF) platform. It uses the OV5647 sensor with a resolution of 5 MP and provides a 360° camera rotation angle thanks to the built-in servo. It is dedicated to the Raspberry Pi 4B and Raspberry Pi 5 minicomputers. 2-Axis Pan-Tilt Camera Module (EU)
zł517.88
24h
Available quantity: 1
Available
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
zł2.95
24h
Available quantity: 27
Available
A set with a 2 DOF control platform for cameras designed for Raspberry Pi, Nvidia Jetson Nano and Xavier NX. It is based on two digital servos and dedicated board. ArduCAM B0283