![Gravity: I/O Expansion Shield - expansion module for the OpenMV Cam M7 camera](https://kamami.pl/91748-large_default/gravity-io-expansion-shield-expansion-module-for-the-openmv-cam-m7-camera-dfr0578.jpg)
![Gravity: I/O Expansion Shield - expansion module for the OpenMV Cam M7 camera](https://kamami.pl/91748-large_default/gravity-io-expansion-shield-expansion-module-for-the-openmv-cam-m7-camera-dfr0578.jpg)
zł18.87 tax excl.
Expansion module for the OpenMV Cam M7 camera. The board has connectors compatible with the Gravity standard. It has digital, analog, serial and I2C pins. DFRobot DFR0578
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Expansion module for the OpenMV Cam M7 camera. The board has connectors compatible with the Gravity standard, thanks to which the user can connect additional sensors and peripheral modules to the camera. The module is equipped with a microUSB port (only used to power the module, therefore it cannot be programmed/debugged) and a 3.3 V/VIN power switch, enabling the connection of servos or motors. In the event of using components that require higher power consumption (motor or servo), they should be powered from ports P7 - P9, connecting the external power supply and switch the power supply to VIN. Power supply of P7, P8, P9 ports can be selected as 3.3V or VIN by switch. The other ports are supplied with the voltage of 3.3 V. It has digital, analog, serial and I2C pins. In addition, the board has a built-in 3.3 V LDO stabilizer that provides power to the Gravity modules. The OpenMV board works with a voltage of 3.3 V, therefore the analog inputs do not support 5 V. All signal pins have a voltage of 3.3 V. The user manual and sample program codes are available on the Wiki website.
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
Camera module with a two-degree-of-freedom (2 DoF) platform. It uses the OV5647 sensor with a resolution of 5 MP and provides a 360° camera rotation angle thanks to the built-in servo. It is dedicated to the Raspberry Pi 4B and Raspberry Pi 5 minicomputers. 2-Axis Pan-Tilt Camera Module (EU)
ArduCam CSI to HDMI modules are designed to work with cameras: Raspberry Pi V1 and Raspberry Camera V2. ArduCAM CSI to HDMI allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters). Arducam B0091
CAMDENBOSS CBRPC-CLR Dev Board Enclosure, Raspberry Pi Camera, Polystyrene, Transparent
No product available!
The control platform equipped with servos allows you to control the position of the camera in two dimensions. It has a built-in driver and light sensor. Waveshare Pan-Tilt HAT
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).
The Arducam Mini Multi-Camera Adapter Board is an expander that can connect up to 4 ArduCam cameras. ArduCam B0074
No product available!
The adapter allows to extend the CSI / DSI interface using two FFC tapes (by connecting them in one tape). It allows you to connect the camera to a Raspberry Pi computer or a DSI display, for distances using two FFC tapes. Adafruit 3671
Multifunctional lens calibration kit for M12, CS-Mount, C-Mount and DSLR lenses. It allows focus calibration, FoV measurement without the need for additional calculations and focusing. ArduCAM B0226
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
No product available!
Flex Cable for Raspberry Pi Camera - 100mm / 4"
30 cm long tape, a knockout attempt for Raspberry Pi Zero series. Waveshare RPi Zero 2 W Camera Cable 30cm
A set of cameras designed for artificial intelligence projects (two 720p and one 12 MPx) configured via USB. ArduCAM OAK-D
No product available!
Base plate designed for Luxonis BW1099 DepthAI SoM modules. It has three interfaces for connecting cameras with a 26-pin connector. ArduCAM B0327
No product available!
Housing with black base. It serves as camera protection for Raspberry Pi V1 and V2. Adafruit 3253
A set of metal handles to build a platform powered by micro servos. It allows you to create a movable stand, e.g. for a camera. SparkFun ROB-10335
No product available!
Expansion module for the OpenMV Cam M7 camera. The board has connectors compatible with the Gravity standard. It has digital, analog, serial and I2C pins. DFRobot DFR0578