ArduCAM USB Camera Shield
ID: 567504
5906623403059
zł335.14
Tax included
zł272.47 tax excl.
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095
Description
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3-14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. The SDK is integrated with the Python language.
The module works with the following camera modules:
properties
- The module will enable connection of ArduCam series cameras to a PC or a mini computer, eg Raspberry Pi or BeagleBone.
- 22 pin camera connection connector (primary camera interface)
- Connecting the camera with a 30-wire tape (secondary camera interface)
- It uses the USB2.0 interface for communication with a computer
567504
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Monochrome camera module 10 Mpx with sensor MT9J001 / MT9J003 designed for use with the ArduCam USB Shield module. Lens LS-18023M12. Support for video recording 1080p @ 30fps and VGA @ 60fps. Arducam 10MP: MT9J001 / MT9J003
Regular pricezł279.58zł208.34
24h
Available quantity: 3
Available
The camera module is based on a CMOS sensor - AR0134. It has a resolution of 1280 x 960 px (1.2 MPx). The module supports recording of video sequences: 1280 x 960 @ 54fps and 1280 x 720 @ 60Ffps. Intended for use only with the ArduCam USB Shield module. Arducam B0100
zł467.78
Delivery date unknown
No product available!
Set with a 48 MP camera equipped with an IMX586 sensor. Equipped with digitally controlled focus. Included with a USB 3.0 adapter and cable. ArduCAM EK032
zł2,099.00
Delivery date unknown
No product available!
Other products in the same category (16)
1/4 Inch 5 Megapixels Sensor Spy Camera Module with Flex Cable for Raspberry Pi. ArduCAM B0066
Regular pricezł187.42zł142.58
24h
Available quantity: 14
Available
5MP Mini Camera OV5647 Sensor 1080p 720p video for Raspberry Pi official Board. ArduCAM B0033
zł19.90
24h
Available quantity: 2
Available
OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031
Regular pricezł134.92zł85.29
24h
Available quantity: 4
Available
OV5647 Camera Board /w CS mount Lens fully compatible with Raspberry Pi. ArduCAM B0032
Regular pricezł180.05zł113.73
24h
Available quantity: 4
Available
1/9" CMOS VGA (640x480) image sensor with OmniPixel3-HS™ technology. ArduCAM B0070
zł21.81
24h
Available quantity: 3
Available
OV7725 based on Omnivision OV7725 image sensor; low voltage CMOS device provides the full functionality of a single-chip VGA camera and image processor as well as the extraordinary high frame rate and low light performance. It provides full-frame, sub-sampled or windowed 8-bit/10-bit images in a wide range of formats, controlled through the Serial Camera Control Bus (SCCB) interface. ArduCAM U3182
Regular pricezł107.43zł75.01
24h
Available quantity: 3
Available
Infrared Camera Module. ArduCAM B0059
zł135.00
4 weeks
No product available!
Camera module with MT9D111 matrix with a resolution of 2 MPx and size 1 / 3.2 ". The transmission speed in JPEG format at full resolution of 1600 x 1200 pixels is 15 fps. It is equipped with a CS mount lens with parameters: 3MP, 1: 1.4, focal length 4.0 mm , format 1 / 2.5 \'\'. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0009
Regular pricezł139.31zł99.90
24h
Available quantity: 4
Available
New 5MegaPixel AutoFocus CMOS camera module with JPEG output. The camera module is based on Omnivision OV5640 image sensor and can be used with ArduCAM shields and other platforms like Freescale i.MX6 develop board. ArduCam U3183
Regular pricezł139.00zł109.00
24h
Available quantity: 15
Available
ArduCam OV5642 5 MPx camera module with OV5642 matrix. Resolution: 2592 x 1944 pixels (5 MPx), pixel size: 1.4 x 1.4 μm, built-in JPEG encoder - operating in real time. B0019
zł161.56
24h
Available quantity: 1
Available
Camera module with an OV5642 matrix with a resolution of 5 MPx and a size of 1/4 "with output in JPEG format. The transmission speed in the full resolution of 2592 x 1944 pixels is 15 fps. It is equipped with an M12x0.5 1/4 \'\' lens. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0020
Regular pricezł159.35zł124.89
24h
Available quantity: 3
Available
Raspberry Pi Camera Module, Embedded IR-CUT, Supports Night Vision
zł97.03
24h
Available quantity: 2
Available
A set of four M12 lenses is an ideal choice to be used with oCam series cameras. Lens set without IR cut filter
zł427.28
24h
Available quantity: 1
Available
Housing with black base. It serves as camera protection for Raspberry Pi V1 and V2. Adafruit 3253
zł15.47
24h
Available quantity: 1
Available
A small, light grip for Raspberry Pi cameras, allows you to mount the module with an image sensor under one of four selected angles of inclination. Stand made of black plexiglass
zł6.92
4 weeks
No product available!
Raspberry Pi Camera Module, Fisheye Lens, Wider Field of View. Waveshare RPi Camera (J)
zł127.01
24h
Available quantity: 4
Available
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095