- Out-of-Stock
Qwiic MP3 Trigger - MP3 player module
ID: 574455
MP3 player module controlled by the I2C interface. It is based on a class D amplifier with a power of 1.4 W. The board has a 3.5 mm headphone output and an 8 Ω speaker connector. Audio files are saved on the microSD card. SparkFun DEV-15165
Description
MP3 player module controlled by the I2C interface. It is based on a class D amplifier with a power of 1.4 W. The board has a 3.5 mm headphone output and an 8 Ω speaker connector. Audio files are saved on the microSD card via the USB interface (USB Type-C connector). The protocol allows you to play one of 255 files stored on the card. It is also possible to run the player without I2C communication - just use one of the 4 trigger pin configurations and the selected file will be played (allows you to play files from T001 to T010). The playback parameters are saved on non-volatile memory, thanks to which the last settings will be loaded the next time the device is started. The product page includes the user manual and the Arduino library.
Features
- It supports microSD cards from 128 MB to 32 GB
- Volume settings, EQ settings and I2C address settings stored in non-volatile memory and loaded each time power is turned on
- WT2003S MP3 decoder IC provides USB access to microSD slot (up to 32GB) and MP3 decoding
- ATtiny84 receives I2C commands and controls the MP3 decoder
- The Poke-home connector allows you to connect the speakers without soldering
- Trigger pins for quick launch of the player
- The ability to play up to 255 files from the SD card via the I2C interface
- Built-in 1.4 W monaural class D amplifier based on TPA2005D1
- Address jumper for selecting the I2C address: 0x37 (default) and 0x38. The I2C address can also be configured with the software to one of 110 addresses
- USB-C connector
- Qwiic connector
- Voltage: 3.3V
- Power consumption:
- 40 mA (in standby mode)
- 40 mA (headphones)
- 150 mA-300 mA (external 8 Ω speaker)
574455
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
No product available!
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.08
24h
Available quantity: 38
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 67
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.90
24h
Available quantity: 10
Available
The SanDisk Ultra microSDHC 32 GB 120MB/s C10 memory card is an efficient and reliable high-capacity storage medium, offering fast data transfer, compatibility with various devices and resistance to difficult conditions, ideal for smartphones, tablets, sports cameras and drones
zł61.70
24h
Available quantity: 14
Available
Other products in the same category (16)
Li-Po battery 3.7V / 600mAh, PCM + NTC protection, 1.25 Molex connector, 3 pins, cable length 35mm
Retired
No product available!
Li-Po battery 3.7V / 650mAh, PCM protection, connector + jack 2.54 JST-BEC, 2 pins, wiring length 150mm
Retired
No product available!
Metal housing for the minicomputer NanoPC T3 Plus. The set includes a set of screws allowing to assemble the housing with a mini computer and an external antenna. FriendlyELEC NanoPC-T3 Plus
Retired
No product available!
Li-Po battery 3.7V / 700mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP503442
Retired
No product available!
Li-Po battery 3.7V / 1500mAh, PCM protection, connector + JST-BEC 2,54 socket, 2 pins, cable length 150mm
Retired
No product available!
Compact ORP system compatible with Arduino. It allows you to monitor the ORP without having to add additional circuits or components. DFRobot SEN0165
Retired
No product available!
Akyga power cord, IEC C7 250V / 50Hz, 1.5 m long
Retired
No product available!
The module allows to measure the distance to the obstacle by measuring the time difference between the wave sent and the reflected wave. Measuring range 2 ... 400cm. Sparkfun SEN-13959
Retired
No product available!
TF Mini LiDAR is a one-way rangefinder that is based on ToF (Time of Flight) technology. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Sparkfun SEN-14588
Retired
No product available!
Set with six microphones designed for audio applications for Raspberry Pi minicomputers. It consists of a board with microphones and a module with audio circuits. Seeed Studio 107990055
Retired
No product available!
SanDisk Ultra memory card is a micro SDHC card, with a capacity of 32GB and a reading speed of 80 MB/s with an adapter. SanDisc SDSQUAR-032G-GN6MA
Retired
No product available!
I-NUCLEO-LRWAN1 is a board with an integrated solution that enables everyone to learn and develop solutions using LoRa® and / or FSK / OOK technology
Retired
No product available!
BleBox ProxiSwitch is a miniature proximity sensor that allows you to turn devices on and off using touch or hand zoom
Retired
No product available!
BleBox SwitchBoxDC is a 12 ... 24V DC wireless switch, extremely easy to install, used to control home appliances using WIFI
Retired
No product available!
ShutterBoxDC allows you to control roller blinds, awnings, venetian or windows equipped with low voltage (12-24V) DC motor by using a smartphone or tablet, also from anywhere in the World.
Retired
No product available!
BleBox tempSensor is a miniature temperature sensor that allows it to be monitored by WiFi. Allows you to measure temperatures in the range of -55 to + 125 degrees Celsius (with an accuracy of ± 0.5°C)
Retired
No product available!
MP3 player module controlled by the I2C interface. It is based on a class D amplifier with a power of 1.4 W. The board has a 3.5 mm headphone output and an 8 Ω speaker connector. Audio files are saved on the microSD card. SparkFun DEV-15165