- Out-of-Stock
The Alchitry Cu is an evaluation kit featuring a Lattice iCE40 HX FPGA chip with 7680 logic cells and supported by the Open Source Project IceStorm toolchain. It has 79 IO pins with eight general-purpose LEDs, a built-in 100MHz clock that can be manipulated internally via FPGA, a USB-C connector for board configuration and power, and a USB interface for data transfer. The board also has a Qwiic connector, which makes it easy to connect sensors and expansion modules compatible with this standard.
Alchitry is a project aimed at providing the necessary tools for beginners to learn FPGA - from cheap kits, through numerous teaching aids and an integrated work environment.
The kit is supported by iCEcube2, Lattice's latest design tools. The system can be programmed using standard languages - Verilog and Lucid languages are dedicated to the set, for which the manufacturer has prepared numerous tutorials.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
Evaluation kit equipped with Xilinx Artix 7 XC7A35T-1C FPGA chip and 256 MB DDR3 RAM. The kit is supported by Vivado and the Verilog and Lucid languages. SparkFun DEV-16527
No product available!
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
Cable with USB type A and USB type C plugs, length 2m, white
No product available!
No product available!
No product available!
The Kamami USB-Blaster is a programmer and configurator for PLD\'s manufactured by Altera. It is fully compatible with USB Blaster, then it can operate with a commercial and evaluation versions of the Altera Quartus project packet
No product available!
Needle bending needle, for precise glue application, Flux 0.337mm internal diameter and 0,6414mm outside diameter
No product available!
LED 5 mm UV 400 - 405 [nm], angle 15 degrees; light intensity 140 mcd (20mA) (3.2V)
No product available!
A miniature linear actuator that has a stroke range of up to 30 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
No product available!
NORS12 is a workshop organizer made of high quality plastic, with a transparent cover, closed with latches, with a solid handle for convenient transport. It has the ability to regulate the size and number of compartments
No product available!
Probe for measuring direct and alternating current with a current of up to 30 A. Works in the band up to 100 MHz, it can be connected to the oscilloscope through the UPI connector. It does not require an external power supply. Micsig CP1003
No product available!
MINIMODUŁ WITH ATMEGA8 MICROCONTROLLER - SELF-MOUNTING KIT
No product available!
No product available!
264x176, 2.7inch E-Ink raw display, three-color, SPI interface, without PCB
No product available!
No product available!
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation board based on CR95HF / ST25R95-VMD5T to enable expansion of the STM32 Nucleo boards
No product available!
Kinetis L Series Cortex-M0+, 32bit MCU, 256 KB Flash , QFN32, Freescale, RoHS
No product available!
No product available!
No product available!
The evaluation kit is equipped with the Lattice iCE40 HX FPGA chip. The kit is supported by iCEcube2 and Verilog and Lucid languages. SparkFun DEV-16526