- Out-of-Stock
zł971.80
2MP camera module with AR0230 and OBISP sensor
ID: 580684
Camera module with a resolution of 2 MP equipped with an image sensor AR0230. The camera has a FoV 90° lens with M12 mount. ArduCAM B0247
Description
Camera module with a resolution of 2 MP equipped with an image sensor AR0230. The camera has a FoV 90° lens with M12 mount. The module has built-in ISP (Image Signal Processor) functions, which significantly extend the camera's capabilities with additional functions and special effects. The module is compatible with kits that support the MIPI CSI-2 interface, eg Raspberry Pi or Jetson Nano.
Features
- Output interface: 2-Lane MIPI CSI-2
- Output format: YUV422, RGB888
- ISP Features: AWB, AE, Flip, Mirror, Gamma, Sharpness, Saturation etc.
- Platform support: Raspberry Pi or Jetson Nano and other platform with MIPI CSI-2 interface
- Sensor type: AR0230
- Resolution: 1920 x 1080 (2 MP)
- Pixel size: 3um x 3um
- Optical Size: 1/2.7″
- Lens Specs:
- M12 mount
- EFL: 4mm
- FoV (H): 90°
- F / NO: 2.8
- Frame rate: 30fps @ 1920 × 1080/1280 × 720/640 × 480/320 × 240
- Sensitivity: 4.0V / lux-sec
- SNR (max): 41 dB
- Dynamic range: 105 dB
- Power consumption: 300 mA, 3.3 V
- Working temperature: -10 to 70 °C
- Dimensions: 40 x 40 mm
Kit contains
- Arducam 2MP OBISP camera module
- 80 mm 22-pin cable
580684
Data sheet
- Resolution
- 2Mpx
- Interface
- MIPI CSI-2
- Sensor
- AR0230
- IR filter
- No
- Lens assembly
- M12
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 131
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 140
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,226.30
24h
Available quantity: 10
Available
Other products in the same category (16)
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
3DR Radio is a set that allows bidirectional transmission of telemetry data, eg between the RC model (with the APM controller) and a PC. Light and small device in a set with antennas and connecting cables. Radio modules have a power of 100mW (+ 20dBm) and transmit a signal over a distance of 1km.
Retired
No product available!
A small USB splitter allowing to connect up to 4 USB devices, powered from the USB port
Retired
No product available!
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! PJRC TEENSY32
Retired
No product available!
No product available!
This is the Teensy Audio board add-on for the Teensy 3.x line development boards. This audio board provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy project. PJRC TEENSY3-AUDIO
Retired
No product available!
No product available!
No product available!
No product available!
AVT kit for self-assembly of the USB-1-Wire converter. AVT1787 B
Retired
No product available!
No product available!
PCB for MKP - control and measurement module with USB interface. AVT5425 A
Retired
No product available!
AVT kit for self-assembly MKP - measuring and control module with USB interface. AVT5425 B
Retired
No product available!
Assembled MKP kit - control and measurement module with USB interface. AVT5425 C
Retired
No product available!
Printed circuit board for mounting running lights. AVT795 A
Retired
No product available!
AVT kit for self-assembly running lights. AVT795 B
Retired
No product available!
Camera module with a resolution of 2 MP equipped with an image sensor AR0230. The camera has a FoV 90° lens with M12 mount. ArduCAM B0247