- Out-of-Stock
Biscuit™ - Programmable Wi-Fi 9-Axis Absolute Orientation Sensor
ID: 567709
WITHROBOT Biscuit
Overview:
The Biscuit™ is an integrated module consisting of 3 dimensional motion sensor and Wi-Fi communication module.
The 3 dimensional motion sensor includes Accelerometer, Gyroscope and Geomagnetic sensor.
The Biscuit™ provides 3-axis absolute orientation in the format of Quaternion, Euler Angle or Rotation Vector as well as Linear Acceleration, Gravity, Heading and Temperature.
The Wi-Fi module has an inherent micro controller unit (MCU) on which users can download their own programs developed on separate development environment (IDE).
The Biscuit™ can be operated using USB bus power or battery to be used as an independent device untethered to a host.
SPECIFICATIONS:
Sensor Data :
3-Axis Gyroscope
3-Axis Accelerometer
3-Axis Geomagnetic Sensor
3-Axis Orientation: Quaternion, Euler Angle, Rotation Vector
Linear Acceleration
Gravity
Heading
Temperature
Sensor Performance:
Accelerometer Ranges: ±2g, ±4g, ±8g, ±16g selectable
Accelerometer Resolution: 14 bit
Gyroscope Ranges: ±125°/s, ±250°/s, ±500°/s, ±1000°/s, ±2000°/s selectable
Gyroscope Resolution: 16 bit
Geomagnetic Sensor Ranges: ±1300µT (x, y axis), ±2500µT (z axis)
Geomagnetic Sensor Resolution: 13 / 13 / 15 bits for x / y / z axes
Wi-Fi:
Protocol: 802.11 b/g/n
Frequency: 2.4 GHz band
MCU:
CPU: 32-bit, 80 MHz
Flash Memory: 2 MB
IDE:
Arduino IDE
Size:
25 mm x 48 mm (PCB)
Power:
USB Bus or Battery Operated
Consumption: 75 mA (sensors and Wi-Fi turned-off)
Input Voltage: 3.7 ~ 5.0 V
Warning!!
Incorrect battery connection can damage the Biscuit™. If your battery has different outputs from the one shown on the above picture, please use the accompanied cable to switch the polarity. Compatible Battery Connector: Molex 51021-0200
WiFi Mouse Using Biscuit™:
Notes:
1. This product was developed & manufactured by WITHROBOT Co., LTD.
2. Board schematics and firmware source code will NOT be publicly released.
567709
You might also like
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
zł55.12
24h
Available quantity: 1
Available
Other products in the same category (16)
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Natural
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Coral Pastel
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Pink
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Violet
Retired
No product available!
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Blue
Retired
No product available!
ROSA3D filament made of high-quality biopolymer. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D BioCREATE
Retired
No product available!
ROSA3D filament made of high-quality biopolymer. 0,5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D BioCREATE
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Blue
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Red Transparent
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Pearl Gold
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Gray
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Red Wine Transparent
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Blue Sky Transparent
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Pearl Gold
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Gray
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Gray
Retired
No product available!
WITHROBOT Biscuit