- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
7" LCD Touchscreen (E) - Waveshare 11470
ID: 568924
800x480, 7 inch Multicolor Graphic LCD, with capacitive touch screen and stand-alone touch controller
Key Parameters
| LCD Type | TFT |
|---|---|
| Interface | RGB |
| Touch Controller | GT811 |
| Touch Panel Type | Capacitive (5 multi-touch) |
| Backlight | LED |
| Display Size (mm) | 154.08 (W) × 85.92 (H) |
| Dot Pitch (mm) | 0.0642 (W) × 0.1790 (H) |
| Resolution | 800 × 480 (Pixel) |
| Operating Voltage | 3.0V~3.6V |
RGB Interface Definition
| PIN NO. | SYMBOL | DESCRIPTION | Type | FUNCTION |
|---|---|---|---|---|
| 1 | BL_VDD | Power positive | Power | Backlight power, connects to 5V power supply |
| 2 | BL_VDD | |||
| 3 | GND | Ground | GND | |
| 4 | VDD | Power positive | Connects to 3.3V power supply | |
| 5 | R0 | Data pin | Input | Red data |
| 6 | R1 | |||
| 7 | R2 | |||
| 8 | R3 | |||
| 9 | R4 | |||
| 10 | R5 | |||
| 11 | R6 | |||
| 12 | R7 | |||
| 13 | G0 | Data pin | Input | Green data |
| 14 | G1 | |||
| 15 | G2 | |||
| 16 | G3 | |||
| 17 | G4 | |||
| 18 | G5 | |||
| 19 | G6 | |||
| 20 | G7 | |||
| 21 | B0 | Data pin | Input | Blue data |
| 22 | B1 | |||
| 23 | B2 | |||
| 24 | B3 | |||
| 25 | B4 | |||
| 26 | B5 | |||
| 27 | B6 | |||
| 28 | B7 | |||
| 29 | GND | Ground | Power | GND |
| 30 | DCLK | LCD clock | Input | LCD clock signal |
| 31 | DISP | Backlight control enable | Input | Enabled/Disable backlight control |
| 32 | HSYNC | Horizontal Synchronization | Input | Horizontal Synchronization signal input |
| 33 | VSYNC | Vertical Synchronization | Input | Vertical Synchronization signal input |
| 34 | DE | Control mode selection | Input | DE = 0 : SYNC mode DE = 1 : DE mode |
| 35 | PWM | Backlight brightness adjustment | Input | PWM signal for adjusting backlight |
| 36 | GND | Ground | Power | GND |
| 37 | I2C_SDA | I2C data | Input/Output | I2C data pin, read/write data |
| 38 | I2C_SCL | I2C clock | Input | I2C clock pin |
| 39 | CAP_RST | Reset | Input | Reset the TP controller |
| 40 | CAP_INT | Interrupt | Output | External touch interrupt |
Compatibility
This item is compatible with and can be directly connected with the following product(s):
- Open746I
The pinout is fully compatible with the following product(s):
- 7inch Capacitive Touch LCD (D)
- 7inch Capacitive Touch LCD (F)
- 10.1inch Capacitive Touch LCD (D)
The pinout is partially compatible with the following product(s) (only the displaying pins):
- 7inch Resistive Touch LCD
- 7inch Capacitive Touch LCD
Selection Guide
| PartNumber | Touch Panel Type | Resolution | LCD Data Interface | Touch Controller | For Use With |
|---|---|---|---|---|---|
| 7inch Resistive Touch LCD | Resistive | 800x480 | 24PIN RGB | None | MCU with LCD controller and ADC |
| 7inch Resistive Touch LCD (C) | Resistive | 800x480 | 16PIN | Embedded RA8875 | MCU without LCD controller |
| 7inch Capacitive Touch LCD | Capacitive | 800x480 | 24PIN RGB | FT5206GE1 | MCU with LCD controller |
| 7inch Capacitive Touch LCD (C) | Capacitive | 800x480 | 16PIN | GT811 | MCU without LCD controller |
| 7inch Capacitive Touch LCD (D) | Capacitive | 1024x600 | 24PIN RGB/LVDS | FT5206GE1 | MCU with LCD controller |
| 7inch Capacitive Touch LCD (E) | Capacitive | 800x480 | 24PIN RGB | GT811 | MCU with LCD controller |
| 7inch Capacitive Touch LCD (F) | Capacitive | 1024x600 | 24PIN RGB | GT811 | MCU with LCD controller |
| 10.1inch Capacitive Touch LCD (D) | Capacitive | 1024x600 | 24PIN RGB/LVDS | FT5406 | MCU with LCD controller |
Informations
Weight: 0.198 kg
- 7inch Capacitive Touch LCD (E) × 1
- 40-pin FFC (opposite sides contact) × 1
568924
Data sheet
- Screen type
- TFT
- Diagonal (inch)
- 7
- Resolution
- 800 x 480 px
- Interface
- Parallel
- Touch
- Yes
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
320×240, 3.2 inch Resistive Touch Screen TFT LCD, Designed for Raspberry Pi
zł97.63
Delivery date unknown
No product available!
IPS LCD 7 "touch screen display for Raspberry Pi. The display is equipped with HDMI interface for image display and USB for touch screen. Resolution 1024x600 pixels. Waveshare 7inch HDMI LCD (C)
zł191.36
24h
Available quantity: 1
Available
10.1 inch 1024*600 Multicolor Graphic LCD, with capacitive touch screen and stand-alone touch controller
Regular pricezł405.11zł313.95
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C
Retired
No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C3
Retired
No product available!
Module with Xilinx Artix-7 15T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-15-1C
Retired
No product available!
Module with Xilinx Artix-7 35T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-35-2C
Retired
No product available!
Module with Xilinx Artix-7 100T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-100-2C
Retired
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2C
Retired
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2D
Retired
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2L
Retired
No product available!
Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-01
Retired
No product available!
Base plate designed to work with TE0745 modules. TEB0745-02
Retired
No product available!
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
Retired
No product available!
Base plate for Trenz Electronic 4 x 5 cm modules. It allows you to connect an FPGA system through board-to-board connections to external peripherals to test and develop software. TE0701-06
Retired
No product available!
UltraITX + base board designed to work with TE0808 UltraSOM + MPSoC modules. It allows you to connect the module to external connectors and interfaces. TEBF0808-04
Retired
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
Retired
No product available!
TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02
Retired
No product available!
Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-05
Retired
No product available!
800x480, 7 inch Multicolor Graphic LCD, with capacitive touch screen and stand-alone touch controller