- Out-of-Stock
TFT 3.5 "display + housing + SD card for Raspberry Pi
ID: 567533
3.5 "TFT display with touch panel, transparent housing and 16 GB SD card for Raspberry Pi 3. ArduCAM U470302
Description
Display with a touch screen (resistive panel) with a diagonal of 3.5 inches and a resolution of 480 x 320 pixels. Uses the SPI interface. It does not require additional drivers. Intended for use with the Raspberry Pi Zero / B + / 2/3 minicomputer.
Attention!
The Raspberry Pi computer seen in the pictures is not included in the set, it must be purchased separately.
The Raspberry Pi computer seen in the pictures is not included in the set, it must be purchased separately.
properties
- For use with: Pi Raspbery, Raspberry B + , Raspberry Pi 2 , Raspberry Pi 3B or Raspberry Pi 3B + .
- Resolution: 480 x 320 pixels
- Interface: SPI
- SPI speed: 32 <Hz
- Dimensions: 55.98 x 85.60 mm
Included
- 3.5 "ArduCAM touch display for Raspberry Pi
- scriber
- Transparent housing
- 16 GB SD card
567533
Data sheet
- Screen type
- TFT
- Diagonal (inch)
- 3,5
- Resolution
- 480 x 320 px
- Interface
- SPI
- Touch
- Yes
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
(Adafruit 1601) PiTFT Mini Kit - 320x240 2.8" TFT+Touchscreen for Raspberry Pi
zł206.07
Delivery date unknown
No product available!
Adafruit 2097 - PiTFT - Assembled 480x320 3.5" TFT+Touchscreen for Raspberry Pi
zł293.99
Delivery date unknown
No product available!
This is a little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers. Adafruit 2109
zł522.90
24h
Available quantity: 1
Available
5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. This display comes with a driver board with HDMI, VGA, and Composite inputs and USB-enabled 40-pin to 50-pin touchscreen adapter board. Adafruit 2110
zł613.65
Delivery date unknown
No product available!
2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423
zł242.42
24h
Available quantity: 1
Available
Other products in the same category (16)
Printed circuit board and programmed circuit for power regulator with LCD display. AVT3218 A +
Retired
No product available!
AVT kit for self-assembly of a power controller with LCD display. AVT3218 B
Retired
No product available!
Assembled power amp with LCD display. AVT3218 C
Retired
No product available!
RGB LED 32 x 32 display module (1024 LEDs). Refresh rate 1: 8. It has two IDC connectors, which allows you to connect multiple displays in series. SparkFun SPX-14633
Retired
No product available!
TFMini is a small laser rangefinder with a measuring range of 0.3 to 12 meters. The measurement resolution is 5 mm. ToF technology (Time of Flight) is used for measurement. Communication with the sensor takes place via the UART interface. SparkFun SEN-14588
Retired
No product available!
GraspIO Cloudio is HAT for use with Raspberry Pi. It allows creating many interesting IoT projects. It is based on the ATmega 32U4 microcontroller. It has an OLED display, an IR receiver, a light sensor, a temperature sensor, an RGB LED and a buzzer. CLOUDIO-SMRTDEV-R-V1
Retired
No product available!
No product available!
BleBox AirSensor is an air quality sensor informing about the presence of harmful dust (PM1, PM2,5, PM10) suspended in the home and outside.
Retired
No product available!
SparkFun BlackBoard is a base plate compatible with Arduino. It is equipped with Atmega 328P microcontroller. It has 14 I / O lines (including 6 PWM channels) and 6 analogue inputs. It has a connector in accordance with the Qwiic standard. SparkFun SPX-14669
Retired
No product available!
SparkFun Papa Soundie Audio Player is a board with ATmega328P microcontroller and VS1000D chip, which allows you to play sounds (in OGG Vorbix and WAV format) stored on a microSD memory card. The board has a 3.5 mm jack connector. SparkFun DEV-14554
Retired
No product available!
No product available!
Printed circuit board and programmed solar collector differential controller. AVT5621 A +
Retired
No product available!
AVT kit for self-assembly of the solar collector differential controller. AVT5621 B
Retired
No product available!
Assembled solar collector differential controller. AVT5621 C
Retired
No product available!
Printed circuit board and programmed countdown timer system. AVT5622 A +
Retired
No product available!
AVT set for self-assembly of the countdown clock. AVT5622 B
Retired
No product available!
3.5 "TFT display with touch panel, transparent housing and 16 GB SD card for Raspberry Pi 3. ArduCAM U470302