

zł197.09 tax excl.
2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423
Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad. The screen looks much nicer, with a black bezel and glass overlay. If you don't need a capacitive touchscreen, check out the resistive touch version.
This updated design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A+, B+! (Any Pi with a 2x20 connector) Not for use with an old Pi 1 with 2x13 connector If you'd like to use a 2.8" display with the original Pi A or Pi B,check out the Model B version. This version also has all 40 pins GPIO pins brought out so you can connect a 40-pin GPIO cable underneath. Now that it's the same outline as a Pi 3/2/B+ it fits well on top of a Pi in our Raspberry Pi Enclosure base and can use our faceplate for a compact touchscreen Pi
The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there's 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.
Use it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.
Raspberry Pi computer and enclosure not included!
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
No product available!
The RASPBERRYPI-2-MODB-1GB is a second generation Raspberry Pi
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
Module with E-Ink (e-Paper) display with a diagonal of 2.13" and a resolution of 250x122 px. Designed for minicomputers Raspberry Pi. Adafruit 4687
Module with a flexible e-Paper display with a diagonal of 10.3" and a resolution of 1872x1404 px. Communication via USB, SPI or I80 interface. Waveshare 10.3inch e-Paper HAT (D)
No product available!
Module with e-Paper display, 10.3" diagonal and 1872x1404 px resolution. Communication via USB, SPI or I80 interface. Waveshare 10.3inch e-Paper HAT
No product available!
3.5" LCD TFT display with touch screen. The display is equipped with an SPI interface for image display and touch screen operation. Resolution 480x320 pixels. Waveshare 3.5inch RPi LCD (C)
No product available!
An e-Paper display driver for the Raspberry Pi with the IT8951 chip, which provides smooth and efficient management of content display on e-Paper screens. It supports various communication interfaces, such as USB, SPI, and I80. Waveshare e-Paper Driver HAT
No product available!
Adafruit 2455 - PiTFT 2.4" HAT Mini Kit - 320x240 TFT Touchscreen
No product available!
Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 800x480 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM370
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM367
No product available!
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 12.48" and a resolution of 1304x984 px. SPI interface. Waveshare 12.48inch e-Paper Module (B)
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM299
No product available!
4" LCD IPS display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 720x720 pixels. Waveshare 4inch DPI LCD (C)
Module with black and white e-Paper display with 2.9" diagonal. Equipped with SPI interface for image display and I2C interface for touch panel. Waveshare 2.9inch Touch e-Paper HAT
Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 720x720 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM475
3.5" TFT LCD display with touch screen. The display is equipped with an SPI interface for image display and touch screen operation. Resolution 480x320 pixels. SparkFun LCD-17520
No product available!
2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423