

zł802.89 tax excl.
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 12.48" and a resolution of 1304x984 px. SPI interface. Waveshare 12.48inch e-Paper Module (B)
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 12.48 "and a resolution of 1304x984 px. It has the ability to display content with a two-level gray scale, the built-in controller communicates via the SPI interface. E-Paper displays are characterized by high contrast of the displayed image and they consume power only when the displayed content is changed The module has a built-in voltage level converter, which makes it compatible with 3.3 V and 5 V systems. Arduino and ESP32 compatible connector On the product page support is available in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino and STM32.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
3-color e-Paper display with a diagonal of 12.48" and a resolution of 1304x984 px. SPI interface. Without PCB. Waveshare 12.48inch e-paper (B)
No product available!
No product available!
Module with black and white e-Paper display with 2.9" diagonal. Equipped with SPI interface for image display and I2C interface for touch panel. Waveshare 2.9inch Touch e-Paper HAT
2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423
16x2 LCD display module with RGB backlight and control keyboard. Communicates via the I2C interface. It has a connector compatible with Raspberry Pi 4 model B and Raspberry Pi 3 model B+. DFRobot DFR0514
Module with e-Paper display, 5.83" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT (C)
E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591
4" LCD IPS display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 720x720 pixels. Waveshare 4inch DPI LCD (C)
Driver for EPAPIER displays in the form of a HAT overlay for Raspberry Pi computers. The SPI interface is used for communication with the controller. Waveshare e-Paper Driver HAT
Module with e-Paper display, 9.7" diagonal and 1200x825 px resolution. Communication via USB, SPI or I80 interface. Waveshare 9.7inch e-Paper HAT
No product available!
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM299
No product available!
4" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and SPI for touch screen. Resolution 800x480 pixels. Waveshare 4inch HDMI LCD (H)
Module with e-Paper display, 2.13" diagonal and 212x104 px resolution. Communication via SPI interface. Waveshare 2.13inch e-Paper HAT (B)
2.23" OLED display overlay designed for Raspberry Pi minicomputers. Module based on SSD1305 driver, communicates via SPI or I2C interface. Waveshare 2.23inch OLED HAT
3.5" display with 480x320 16-bit color pixels and a resistive touch overlay, engineered specifically to work with the newer "2x20 connector" Raspberry Pi\'s. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Adafruit 2441
No product available!
IPS 3.5" LCD display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch panel. Resolution 640x480 pixels. Waveshare 3.5inch DPI LCD
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 12.48" and a resolution of 1304x984 px. SPI interface. Waveshare 12.48inch e-Paper Module (B)