4.01" 7-color E-Ink e-Paper HAT module (F) 640x400 for Raspberry Pi - Waveshare 19283
ID: 584062
5906623469468
zł296.54
Tax included
zł241.09 tax excl.
Module with 7-color display ACeP e-Paper with a diagonal of 4.01" and a resolution of 640x400 px. SPI interface. Waveshare 4.01inch e-Paper HAT (F)
Description
Module with a 7-color e-Paper display with a diagonal of 4.01" and a resolution of 640x400 px. It has the ability to display content with a two-step gray scale and supports ACeP (Advanced Color ePaper) technology. The built-in controller performs communication via the SPI interface. Paper is characterized by a high contrast of the displayed image and consumes electricity only when the displayed content is changed The module has a built-in voltage level converter, which makes it compatible with 3.3 V and 5 V systems. It is equipped with a 40-pin connector that allows you to connect the display to the Raspberry Pi. The product page has support for use examples with Raspberry Pi, Jetson Nano, Arduino and STM32.
Features
- Diagonal: 4.01"
- Resolution: 640x400 px
- Display color: ACeP 7-Color
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.135 × 0.135
- Full refresh time: 15 seconds
- Power consumption: 50 mW
- Viewing angle:> 170 °
- No backlight, display the last content after power off
- Low energy consumption
- Built-in logic level converter, compatible with 3.3V/5V MCU
- Working voltage: 3.3V/5V
- Display size: 86.4 x 54mm
- Module dimensions: 98.5 x 70 mm
Kit contains
- 4.01inch e-Paper HAT (F) Display
- PH2.0 20cm 8-pin cable
- Set of screws
584062
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 4,01
- Resolution
- 640 x 400 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł49.90
24h
Available quantity: 15
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 41
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,055.36
24h
Available quantity: 1
Available
Other products in the same category (16)
Adafruit 2455 - PiTFT 2.4" HAT Mini Kit - 320x240 TFT Touchscreen
zł228.60
4 weeks
No product available!
IPS 3.5" LCD display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch panel. Resolution 640x480 pixels. Waveshare 3.5inch DPI LCD
zł134.27
24h
Available quantity: 3
Available
Module with e-Paper display, 5.83" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT (C)
zł316.17
24h
Available quantity: 1
Available
3.5" LCD TFT display with touch screen. The display is equipped with an SPI interface for image display and touch screen operation. Resolution 480x320 pixels. Waveshare 3.5inch RPi LCD (C)
zł87.70
24h
Available quantity: 3
Available
Inky pHAT (ePaper/eInk/EPD) - module with ePaper 2,13" display for Raspberry Pi (yellow/black/white)
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM367
zł147.00
4 weeks
No product available!
An e-Paper display driver for the Raspberry Pi with the IT8951 chip, which provides smooth and efficient management of content display on e-Paper screens. It supports various communication interfaces, such as USB, SPI, and I80. Waveshare e-Paper Driver HAT
zł126.85
4 weeks
No product available!
Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 800x480 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM370
zł321.13
4 weeks
No product available!
Module with black and white e-Paper display, 5.83" diagonal and 648x480 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT
zł223.48
4 weeks
No product available!
3.5-inch TFT LCD display with case designed for Raspberry Pi. The display with a resolution of 320x480 px is equipped with a resistive touch screen. ArduCAM U611101
zł148.23
24h
Available quantity: 1
Available
Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 720x720 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM475
zł428.16
24h
Available quantity: 1
Available
1.44inch LCD display HAT for Raspberry Pi, 128x128 pixels, SPI interface
zł39.40
4 weeks
No product available!
LCD TFT 1.14" display with a resolution of 135x240 pixels. Equipped with an SPI interface and two user buttons. Adafruit 4393
zł51.38
4 weeks
No product available!
Module with E-Ink (e-Paper) display with a diagonal of 2.13" and a resolution of 250x122 px. Designed for minicomputers Raspberry Pi. Adafruit 4687
zł113.23
24h
Available quantity: 1
Available
Module with a flexible e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare 2.9inch e-Paper HAT (D)
zł118.90
4 weeks
No product available!
Module with a color LCD TFT display with a diagonal of 1.3" and a resolution of 240x240 px. Designed for minicomputers Raspberry Pi. Adafruit 4506
zł97.69
24h
Available quantity: 2
Available
Starter kit with Qwiic modules designed to work with the Raspberry Pi. The set consists of an overlay for Raspberry Pi with a standard 40-pin connector and four Qwiic connectors, OLED display, VCNL4040 distance sensor and environmental sensors. SparkFun KIT-16841
zł344.38
24h
Available quantity: 1
Available
Module with 7-color display ACeP e-Paper with a diagonal of 4.01" and a resolution of 640x400 px. SPI interface. Waveshare 4.01inch e-Paper HAT (F)