New products
New products New products
zł301.74
24h
Dostępny
Available
Available
zł59.04
24h
Available
Qwiic Starter Kit for Raspberry Pi
ID: 581166
5906623438402
zł344.38
Tax included
zł279.98 tax excl.
Starter kit with Qwiic modules designed to work with the Raspberry Pi. The set consists of an overlay for Raspberry Pi with a standard 40-pin connector and four Qwiic connectors, OLED display, VCNL4040 distance sensor and environmental sensors. SparkFun KIT-16841
Description
Starter kit with Qwiic modules designed to work with the Raspberry Pi. The set consists of an overlay for Raspberry Pi with a standard 40-pin connector and four Qwiic connectors, OLED display, VCNL4040 distance sensor and environmental sensors. The whole can be easily connected thanks to the cables with a length of 50 cm and 100 cm.
The kit is based on a 40-pin connector, which means that it can be used not only with the Raspberry Pi, but also with all starter kits equipped with this connector, eg Nvidia Jetson Nano. The manufacturer also provides extensive support in the form of libraries and quick start instructions.
Features
Qwiic pHAT v2.0
- 4 x Qwiic connectors
- 5V screw terminal
- General purpose button
- HAT-compliant 40-pin female connector
Micro OLED Breakout
- Diagonal: 0.66 inch
- Resolution: 64 x 48 pixels
- Interface: I2C
- Driver: SSD1306
- Qwiic connector
- Made in OLED technology
- Text display: white color
- Supply voltage: 3.3 V
Proximity Sensor Breakout
- Range: 20 cm
- Integrated modules: infrared transmitter (IRED), ambient light sensor (ALS), proximity sensor (PS)
- ALS and PS in a parallel structure
- No dead zone
- Working voltage: 3.3V
- I2C address: 0x60
- 2 x Qwiic connectors
Environmental Combo Breakout
- Qwiic-Connector Enabled
- Operation Voltage: 3.3V
- Total Volatile Organic Compound (TVOC) sensing from 0 to 1,187 parts per billion
- eCO2 sensing from 400 to 8,192 parts per million
- Temp Range: -40C to 85C
- Humidity Range: 0–100% RH, =-3% from 20–80%
- Pressure Range: 30,000Pa to 110,000Pa, relative accuracy of 12Pa, absolute accuracy of 100Pa
- Altitude Range: 0 to 30,000 feet (9.2 km), relative accuracy of 3.3 feet (1m) at sea level, 6.6 (2m) at 30,000 feet
Kit contains
- SparkFun Qwiic pHAT v2.0 for Raspberry Pi
- SparkFun Micro OLED Breakout (Qwiic)
- SparkFun Proximity Sensor Breakout - 20cm, VCNL4040 (Qwiic)
- SparkFun Environmental Combo Breakout - CCS811/BME280 (Qwiic)
- 2 x Qwiic cable - 50mm
- 2 x Qwiic cable - 100mm
581166
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 8
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 81
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,041.99
24h
Available quantity: 4
Available
Other products in the same category (16)
A set of accessories for connecting the Raspberry Pi minicomputer to the Qwiic ecosystem. Includes 16x2 LCD display module, IMU 9DOF module, SHIM board and Qwiic cables. SparkFun KIT-16987
zł194.91
3 weeks
No product available!
The DFRobot IO Expansion HAT module provides additional digital, analog, I2C, PWM, UART and SPI outputs. Thanks to its small size, it fits perfectly with Raspberry Pi Zero and Zero W. DFRobot DFR0604
zł77.75
24h
Available quantity: 1
Available
Shield with Qwiic connectors designed for Raspberry Pi minicomputers. It allows you to easily connect the minicomputer with the Qwiic sensor system. SparkFun DEV-15945
zł39.69
24h
Available quantity: 1
Available
The expansion module is designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has two 40-pin connector in a vertical position. Waveshare PI400-GPIO-ADAPTER-B
zł20.31
24h
Available quantity: 1
Available
The expansion module is designed to work with the Raspberry Pi 400. The board has a 40-pin connector placed in a vertical position and a connector for RPI 400 at an angle of 45°. Adafruit 4863
zł44.46
24h
Available quantity: 2
Available
Raspberry Pi Expansion Board, Supports Arduino XBee. Waveshare ARPI600
zł408.22
24h
Available quantity: 2
Available
Expansion module designed to work with a portable computer built into the Raspberry Pi 400 keyboard. There are two 40-pin connectors on the board in a vertical position. SB Components 21307
zł36.63
24h
Available quantity: 4
Available
The expansion module is designed to work with the Raspberry Pi 400. The board has a 40-pin connector placed in a vertical position and a connector for RPI 400 at an angle of 45°. Adafruit 4862
zł40.98
24h
Available quantity: 2
Available
Universal GPIO expansion board compatible with Raspberry Pi 4/3/2 Model B and Model A with assembly kit required to mount the board to the Raspberry Pi minicomputer.
zł22.58
24h
Available quantity: 5
Available
Raspberry Pi Expansion Board, Miscellaneous Components, All-in-One, Waveshare
zł151.13
24h
Available quantity: 1
Available
Module with 16-channel IO expander MCP23017 controlled by the I2C interface. Designed for minicomputers Raspberry Pi. Adafruit 4132
zł55.67
24h
Available quantity: 2
Available
Expansion HAT from Waveshare is equipped with an I2C interface, 2-channel UART and 8 GPIO, which increase the functionality and capabilities of Raspberry Pi projects
zł43.04
4 weeks
No product available!
Module of the 8-channel I2C expander based on the TCA9548A system. It enables communication with many I2C devices that have the same address. Pimoroni 8086-006
zł65.25
4 weeks
No product available!
KAmodRPi-Pmod-HAT is a HAT for Raspberry Pi 5/4B/3B+/3B/2B/B+ minicomputers that allows use of the communication interfaces available on the 40-pin minicomputer connector
zł42.90
24h
Available quantity: 260
Available
GrovePi + is an extension in the form of a HAT overlay intended for Raspberry Pi computers (B / B + / A + / 2/3/3 +). The module has 15 connectors to which modules / sensors compatible with the Grove standard can be connected. Seeed Studio 103010002
zł298.47
24h
Available quantity: 3
Available
Expansion module designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has a 40-pin connector in a vertical position. SB Components 21239
zł21.99
24h
Available quantity: 2
Available
Starter kit with Qwiic modules designed to work with the Raspberry Pi. The set consists of an overlay for Raspberry Pi with a standard 40-pin connector and four Qwiic connectors, OLED display, VCNL4040 distance sensor and environmental sensors. SparkFun KIT-16841