GPIO Expander Bonnet - module with 16-channel IO expander for Raspberry Pi
ID: 574445
5906623429967
zł55.67
Tax included
zł45.26 tax excl.
Module with 16-channel IO expander MCP23017 controlled by the I2C interface. Designed for minicomputers Raspberry Pi. Adafruit 4132
Description
I/O port expander 16-channel module controlled by the I2C interface. It was based on the Microchip MCP23017 system and is designed for Raspberry Pi minicomputers. Each IO pin can be configured as input or output. The maximum output current should not exceed 20 mA, and the pins are compatible with voltages of 3.3 V and 5 V. The module has 3 address jumpers that allow you to select 8 different addresses, so you can connect up to 8 modules to one I2C interface. It is powered with the voltage of 5 V and connects to the minicomputer via a 40-pin GPIO connector. Full documentation with examples is available on the product page.
Features
- Chip: MCP23017
- Number of IOs: 16 (input, output)
- Two interrupt pins: INTA and INTB
- Current efficiency of one IO: 20 mA (125 mA for the entire system)
- 12C frequency: 100KHz, 400KHz, 1.7MHz
- Address jumpers
- Working voltage: 3.2V or 5V
- Working temperature: -40°C to 125°C
- Dimensions: 65 x 30.6 x 5.6 mm
Kit contains
- GPIO Expander Bonnet module
- 2 x 16-pin IDC connector
574445
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with 16-channel I/O ports expander controlled by the I2C interface. It was based on the MCP23017 chip. Waveshare MCP23017 IO Expansion Board
zł27.75
24h
Available quantity: 6
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 48
Available
Universal prototyping board for Raspberry Pi minicomputers. Comes with a 40-pin connector. Adafruit 3203
zł23.30
24h
Available quantity: 3
Available
Other products in the same category (16)
Expansion HAT from Waveshare is equipped with an I2C interface, 2-channel UART and 8 GPIO, which increase the functionality and capabilities of Raspberry Pi projects
zł43.04
4 weeks
No product available!
The expansion module is designed to work with the Raspberry Pi 400. The board has a 40-pin connector placed in a vertical position and a connector for RPI 400 at an angle of 45°. Adafruit 4862
zł40.98
24h
Available quantity: 2
Available
The DFRobot IO Expansion HAT module provides additional digital, analog, I2C, PWM, UART and SPI outputs. Thanks to its small size, it fits perfectly with Raspberry Pi Zero and Zero W. DFRobot DFR0604
zł77.75
24h
Available quantity: 1
Available
Raspberry Pi Expansion Board, Miscellaneous Components, All-in-One, Waveshare
zł151.13
24h
Available quantity: 1
Available
GrovePi + is an extension in the form of a HAT overlay intended for Raspberry Pi computers (B / B + / A + / 2/3/3 +). The module has 15 connectors to which modules / sensors compatible with the Grove standard can be connected. Seeed Studio 103010002
zł298.47
24h
Available quantity: 3
Available
Available
KAmodRPi-Pmod-HAT is a HAT for Raspberry Pi 5/4B/3B+/3B/2B/B+ minicomputers that allows use of the communication interfaces available on the 40-pin minicomputer connector
zł42.90
24h
Available quantity: 260
Available
The expansion module is designed to work with the Raspberry Pi 400. The board has a 40-pin connector placed in a vertical position and a connector for RPI 400 at an angle of 45°. Adafruit 4863
zł44.46
24h
Available quantity: 2
Available
Starter kit with Qwiic modules designed to work with the Raspberry Pi. The set consists of an overlay for Raspberry Pi with a standard 40-pin connector and four Qwiic connectors, OLED display, VCNL4040 distance sensor and environmental sensors. SparkFun KIT-16841
zł344.38
24h
Available quantity: 1
Available
Universal GPIO expansion board compatible with Raspberry Pi 4/3/2 Model B and Model A with assembly kit required to mount the board to the Raspberry Pi minicomputer.
zł22.58
24h
Available quantity: 3
Available
A set of accessories for connecting the Raspberry Pi minicomputer to the Qwiic ecosystem. Includes 16x2 LCD display module, IMU 9DOF module, SHIM board and Qwiic cables. SparkFun KIT-16987
zł194.91
3 weeks
No product available!
Expansion module designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has a 40-pin connector in a vertical position. SB Components 21239
zł21.99
24h
Available quantity: 1
Available
This expansion module allows you to display the Raspberry Pi Pico display on a monitor or TV with an HDMI input. Equipped with a mini HDMI port, an HSTX interface, and a STEMMA QT/Qwiic connector, it ensures fast and stable data transfer. Compatible with Pico 1 and Pico 2, it offers resolutions up to 800x480 pixels and works with the Arduino and CircuitPython libraries. Adafruit 6363
zł35.06
24h
Available quantity: 3
Available
Shield with Qwiic connectors designed for Raspberry Pi minicomputers. It allows you to easily connect the minicomputer with the Qwiic sensor system. SparkFun DEV-15945
zł39.69
24h
Available quantity: 1
Available
A mini module with a Qwiic connector designed for Raspberry Pi minicomputers. Qwiic SHIM uses a unique connector that snaps into the GPIO connector for a secure, solder-free connection. SparkFun DEV-15794
zł9.75
24h
Available quantity: 2
Available
The expansion module is designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has two 40-pin connector in a vertical position. Waveshare PI400-GPIO-ADAPTER-B
zł20.31
4 weeks
No product available!
Module with 16-channel IO expander MCP23017 controlled by the I2C interface. Designed for minicomputers Raspberry Pi. Adafruit 4132