2.9" flexible E-Ink e-Paper HAT module (D) 296x128 for Raspberry Pi - Waveshare 16565
ID: 582589
5906623422333
zł118.90
Tax included
zł96.67 tax excl.
Module with a flexible e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare 2.9inch e-Paper HAT (D)
Description
Module with a flexible e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. It has the ability to display content with a two-level gray scale in black and white and the function of partial refreshing. The built-in controller implements communication via the SPI interface, and the flexible panel allows you to bend the display without damaging it. E-Paper displays are characterized by high contrast of the displayed image and only consume power when the displayed content is changed. The module is compatible with 3.3 V systems. The kit includes an overlay that allows you to connect the display via a 40-pin connector. On the Wiki page is available support in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino, STM32.
Features
- Diagonal 2.9"
- Resolution: 296x128 px
- Interface: SPI
- Spot size: 0.227 × 0.226 mm
- Display color: black, white
- Grayscale: 2
- Full refresh time: 2 seconds
- Refresh power: 26.4mW (typ.)
- Standby power: <0.017 mW
- Viewing angle:> 170 °
- Voltage: 3.3V to 5V
- Outline dimensions: 79 × 36.7 × 0.34 mm
- Display dimensions: 66.9 × 29.06 mm
Kit includes
- Display e-Paper 2.9"
- e-Paper Driver HAT containing:
- E-Paper Driver HAT module
- FFC cable
- Board with two FFC connectors
- Set of brass spacers with screws
- JST PH2.0 8P cable
582589
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,9
- Resolution
- 296 x 128 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł49.90
24h
Available quantity: 15
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł65.92
24h
Available quantity: 5
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 41
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,055.36
24h
Available quantity: 1
Available
Other products in the same category (16)
Driver for EPAPIER displays in the form of a HAT overlay for Raspberry Pi computers. The SPI interface is used for communication with the controller. Waveshare e-Paper Driver HAT
zł36.37
24h
Available quantity: 6
Available
Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 720x720 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM475
zł428.16
24h
Available quantity: 1
Available
Module with e-Paper display, 2.7" diagonal and 264x176 px resolution. Communication via SPI interface. Waveshare 2.7inch e-Paper HAT
zł89.83
24h
Available quantity: 9
Available
Module with e-Paper display, 3.7" diagonal and 480x280 px resolution. Communication via SPI interface. Waveshare 3.7inch e-Paper HAT
zł148.88
24h
Available quantity: 2
Available
2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423
zł242.42
24h
Available quantity: 1
Available
Module with black and white e-Paper display, 5.83" diagonal and 648x480 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT
zł223.48
4 weeks
No product available!
3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi, 320×480 resolution. Waveshare 3.5inch RPi LCD (A)
zł94.77
24h
Available quantity: 5
Available
4" LCD IPS display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 720x720 pixels. Waveshare 4inch DPI LCD (C)
zł199.84
24h
Available quantity: 2
Available
Adafruit 2315
zł147.12
4 weeks
No product available!
HDMI 3.5 "480 x 320 pixel color LCD module with touch panel for Raspberry Pi. Waveshare 3.5inch HDMI LCD
zł161.59
4 weeks
No product available!
Module with e-Paper display, 13.3" diagonal and 1600x1200 px resolution. Communication via USB, SPI or I80 interface. Waveshare 13.3inch e-Paper HAT
zł2,331.78
4 weeks
No product available!
Module with a flexible e-Paper display with a diagonal of 10.3" and a resolution of 1872x1404 px. Communication via USB, SPI or I80 interface. Waveshare 10.3inch e-Paper HAT (D)
zł1,404.83
4 weeks
No product available!
2.8" IPS LCD display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 480x640 pixels. Waveshare 2.8inch DPI LCD
zł127.90
24h
Available quantity: 2
Available
4" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and SPI for touch screen. Resolution 800x480 pixels. Waveshare 4inch HDMI LCD (H)
zł175.78
24h
Available quantity: 3
Available
320×240, 3.2 inch Resistive Touch Screen TFT LCD, Designed for Raspberry Pi
zł91.30
24h
Available quantity: 2
Available
Module with e-Paper display, 10.3" diagonal and 1872x1404 px resolution. Communication via USB, SPI or I80 interface. Waveshare 10.3inch e-Paper HAT
zł1,109.47
4 weeks
No product available!
Module with a flexible e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare 2.9inch e-Paper HAT (D)