New products
New products New products
zł259.00
Delivery date unknown
Available
zł50.18
24h
Available
5.83" E-Ink e-Paper Display HAT 648x480 for Raspberry Pi - Waveshare 14597
ID: 573326
5906623469406
zł223.48
Tax included
zł181.69 tax excl.
Module with black and white e-Paper display, 5.83" diagonal and 648x480 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT
Description
E-Paper module with a 5.83" diagonal and a resolution of 648x480 px. It has the ability to display content with a two-level gray scale in three colors: black and white. The built-in controller communicates via the SPI interface. Displays of this type are characterized by high contrast of the displayed image and they consume power only when the displayed content is changed The module is compatible with 3.3 V and 5 V systems. The kit includes an overlay that allows you to connect the display via a 40-pin connector. On the Wiki page is available support in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino, STM32.
Features
- Diagonal 5.83"
- Resolution: 648x480 px
- Interface: SPI
- Spot size: 0.184 × 0.184 mm
- Display color: black, white
- Grayscale: 2
- Full refresh time: 5 seconds
- Refresh power: 26.4mW (typ.)
- Standby power: <0.017 mW
- Viewing angle:> 170 °
- Voltage: 3.3V to 5V
- Outline dimensions: 125.40 x 99.50 mm
- Display dimensions: 119.232 x 88.32 mm
Kit includes
- Display e-Paper 5,83"
- e-Paper Driver HAT containing:
- E-Paper Driver HAT module
- FFC cable
- Board with two FFC connectors
- Set of brass spacers with screws
- JST PH2.0 8P cable
573326
Data sheet
- Compatible with
- Raspberry Pi
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 5,83
- Resolution
- 648 x 480 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł49.90
24h
Available quantity: 15
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł65.92
24h
Available quantity: 11
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 47
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,055.36
24h
Available quantity: 1
Available
Other products in the same category (16)
1.44inch LCD display HAT for Raspberry Pi, 128x128 pixels, SPI interface
zł39.40
4 weeks
No product available!
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM299
zł147.00
4 weeks
No product available!
2.8" IPS LCD display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 480x640 pixels. Waveshare 2.8inch DPI LCD
zł127.90
24h
Available quantity: 2
Available
HDMI 3.5 "480 x 320 pixel color LCD module with touch panel for Raspberry Pi. Waveshare 3.5inch HDMI LCD
zł161.59
24h
Available quantity: 1
Available
3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi, 320×480 resolution. Waveshare 3.5inch RPi LCD (A)
zł94.77
24h
Available quantity: 5
Available
Module with black and white e-Paper display with 2.9" diagonal. Equipped with SPI interface for image display and I2C interface for touch panel. Waveshare 2.9inch Touch e-Paper HAT
zł98.89
24h
Available quantity: 6
Available
Adafruit 3527 is a small display, ready to connect on any Raspberry Pi computer. It is equipped with a 128x32 monochrome OLED display with sharp white pixels. OLED uses only I2C pins, so it offers many GPIO connections available for buttons, LEDs, sensors etc. It is also nice and compact. Adafruit 3527
zł82.27
24h
Available quantity: 1
Available
4" LCD IPS display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 720x720 pixels. Waveshare 4inch DPI LCD (C)
zł199.84
24h
Available quantity: 2
Available
4 inch Touch Screen TFT LCD Designed for Raspberry Pi
zł117.18
24h
Available quantity: 4
Available
16x2 LCD display module with RGB backlight and control keyboard. Communicates via the I2C interface. It has a connector compatible with Raspberry Pi 4 model B and Raspberry Pi 3 model B+. DFRobot DFR0514
zł43.31
24h
Available quantity: 1
Available
Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 800x480 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM370
zł321.13
4 weeks
No product available!
Module with a black and white OLED display with a diagonal of 1.3" and a resolution of 128x64 px. Designed for minicomputers Raspberry Pi. Adafruit 3531
zł114.08
24h
Available quantity: 1
Available
Starter kit with Qwiic modules designed to work with the Raspberry Pi. The set consists of an overlay for Raspberry Pi with a standard 40-pin connector and four Qwiic connectors, OLED display, VCNL4040 distance sensor and environmental sensors. SparkFun KIT-16841
zł344.38
24h
Available quantity: 1
Available
3.5" LCD IPS display with touch screen. The display is equipped with an SPI interface for image display and touch screen operation. Resolution 480x320 pixels. Waveshare 3.5inch RPi LCD (B)
zł102.02
4 weeks
No product available!
Raspberry Pi Expansion Board, Miscellaneous Components, All-in-One, Waveshare
zł151.13
24h
Available quantity: 1
Available
Module with e-Paper display, 5.83" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT (C)
zł316.17
24h
Available quantity: 1
Available
Module with black and white e-Paper display, 5.83" diagonal and 648x480 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT