zł54.86 tax excl.
Module with E-Ink display with a resolution of 250x122 pixels and a diagonal of 2.13 inches. Designed for the Raspberry Pi computer (HAT overlay). SPI interface communication. Waveshare 2.13inch e-Paper HAT
Module with E-Ink display with a resolution of 250x122 pixels and a diagonal of 2.13 inches. Module in the form of HAT overlay for the Raspberry Pi computer. It allows you to display two colors: black and white. The display has a built-in controller, communication takes place via the SPI interface. It has a partial refresh function. Displays of this type are characterized by high contrast of the displayed image and low power consumption.
The module is compatible with Raspberry Pi 2B / 3B / Zero / Zero W. There are materials and examples of use with Raspberry Pi / Arduino / STM32.
Pwnagotchi is a unique project based on Raspberry Pi, designed for passive testing of Wi-Fi network security. It was created as an intelligent tool that learns from the surrounding wireless networks and captures so-called "handshakes" – data used later for attempts to crack Wi-Fi passwords for educational and testing purposes. Pwnagotchi is inspired by the concept of Tamagotchi, the interactive virtual pet that users could "communicate" with and help develop. In the case of Pwnagotchi, its "personality" and efficiency improve over time, as the device uses artificial intelligence algorithms to optimize its actions in different environments.
The device operates in a passive mode, meaning it does not interfere with the network but simply listens to the network traffic and captures data for further analysis. Pwnagotchi is mainly used by security professionals and enthusiasts who want to learn more about Wi-Fi network security and improve their defenses.
In this context, the Waveshare 2.13-inch e-Paper HAT is recommended by the creators of Pwnagotchi as the optimal solution for displaying key information about the device’s operation. This display, thanks to its e-ink technology, consumes minimal energy, which is crucial for battery-powered projects like Pwnagotchi. It can display important information such as the number of captured handshakes, device status, or battery level. The screen is also highly readable in various lighting conditions, making it ideal for outdoor use.
Pwnagotchi not only analyzes and "learns" from networks but also interacts with other Pwnagotchi devices if it encounters them within range, allowing for even more advanced capabilities.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
E-Ink display module with a resolution of 400x300 pixels and a diagonal of 4.2 inches. The display has a built-in controller, communication takes place via the SPI interface. Waveshare 4.2inch e-Paper Module
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
Module with e-Paper display, 2.7" diagonal and 264x176 px resolution. Communication via SPI interface. Waveshare 2.7inch e-Paper HAT
No product available!
E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591
Adafruit 3527 is a small display, ready to connect on any Raspberry Pi computer. It is equipped with a 128x32 monochrome OLED display with sharp white pixels. OLED uses only I2C pins, so it offers many GPIO connections available for buttons, LEDs, sensors etc. It is also nice and compact. Adafruit 3527
Module with a flexible e-Paper display with a diagonal of 10.3" and a resolution of 1872x1404 px. Communication via USB, SPI or I80 interface. Waveshare 10.3inch e-Paper HAT (D)
No product available!
Module with e-Paper display, 5.83" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT (C)
3.5" LCD IPS display with touch screen. The display is equipped with an SPI interface for image display and touch screen operation. Resolution 480x320 pixels. Waveshare 3.5inch RPi LCD (B)
16x2 LCD display module with RGB backlight and control keyboard. Communicates via the I2C interface. It has a connector compatible with Raspberry Pi 4 model B and Raspberry Pi 3 model B+. DFRobot DFR0514
2.23" OLED display overlay designed for Raspberry Pi minicomputers. Module based on SSD1305 driver, communicates via SPI or I2C interface. Waveshare 2.23inch OLED HAT
No product available!
3.5-inch TFT LCD display with case designed for Raspberry Pi. The display with a resolution of 320x480 px is equipped with a resistive touch screen. ArduCAM U611101
Starter kit with Qwiic modules designed to work with the Raspberry Pi. The set consists of an overlay for Raspberry Pi with a standard 40-pin connector and four Qwiic connectors, OLED display, VCNL4040 distance sensor and environmental sensors. SparkFun KIT-16841
3.5" LCD TFT display with touch screen. The display is equipped with an SPI interface for image display and touch screen operation. Resolution 480x320 pixels. Waveshare 3.5inch RPi LCD (C)
No product available!
4" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and SPI for touch screen. Resolution 800x480 pixels. Waveshare 4inch HDMI LCD (H)
A set of accessories for connecting the Raspberry Pi minicomputer to the Qwiic ecosystem. Includes 16x2 LCD display module, IMU 9DOF module, SHIM board and Qwiic cables. SparkFun KIT-16987
No product available!
Module with e-Paper display, diagonal 7.5" and resolution 800×480px. Communication via SPI. Waveshare 7.5inch e-Paper HAT
2.8" IPS LCD display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 480x640 pixels. Waveshare 2.8inch DPI LCD
Module with e-Paper display, 6" diagonal and 1448x1072 px resolution. Communication via USB, SPI or I80 interface. Waveshare 6inch HD e-Paper HAT
No product available!
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 12.48" and a resolution of 1304x984 px. SPI interface. Waveshare 12.48inch e-Paper Module (B)
Module with E-Ink display with a resolution of 250x122 pixels and a diagonal of 2.13 inches. Designed for the Raspberry Pi computer (HAT overlay). SPI interface communication. Waveshare 2.13inch e-Paper HAT