Raspberry Pi HAT with Flexible 2.13" E-Ink e-Paper Display - Waveshare 15084
ID: 577637
5906623422289
zł102.02
Tax included
zł82.94 tax excl.
2.13 "e-Paper flexible display HAT designed for Raspberry Pi minicomputers. Communicates with external systems via the SPI interface. The module has support in the form of examples for Raspberry Pi, Jetson Nano, STM32, Arduino. Waveshare 2.13inch e-Paper HAT (D)
Description
Module with a flexible e-Paper display with a diagonal of 2.3" and a resolution of 212 × 104 px. It has the ability to display content with a two-level gray scale in black and white and the function of partial refreshing. The built-in controller implements communication via the SPI interface, and the flexible panel allows you to bend the display without damaging it. E-Paper displays are characterized by high contrast of the displayed image and only consume power when the displayed content is changed. The module is compatible with 3.3 V systems. The kit includes an overlay that allows you to connect the display via a 40-pin connector. On the Wiki page is available support in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino, STM32.
Features
- Diagonal: 2,13"
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.229 × 0.228
- Resolution: 212 × 104 px
- Display color: black, white
- Grey level: 2
- Full refresh time: 2s
- Viewing angle: >170°
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Outline dimension: 59.2 × 29.2 × 0.3mm
- Display size: 23.71 × 48.55mm
Kit includes
- Flexible display e-Paper 2,13 "
- e-Paper Driver HAT containing:
- E-Paper Driver HAT module
- FFC cable
- Board with two FFC connectors
- Set of brass spacers with screws
- JST PH2.0 8P cable
577637
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,13
- Resolution
- 250 x 122 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 106
Available
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller
zł55.31
24h
Available quantity: 1
Available
Tri-color E-Ink display (ePapier) with a diagonal of 1.54 "and resolution 152x152 pixels with SPI controller, SRAM memory and a MicroSD card slot. Adafruit 3625
zł149.81
24h
Available quantity: 2
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
Delivery date unknown
No product available!
2.23" OLED display overlay designed for Raspberry Pi minicomputers. Module based on SSD1305 driver, communicates via SPI or I2C interface. Waveshare 2.23inch OLED HAT
zł55.56
24h
Available quantity: 8
Available
Module with e-Paper display, 2.7" diagonal and 264x176 px resolution. Communication via SPI interface. Waveshare 2.7inch e-Paper HAT
zł89.83
24h
Available quantity: 10
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,028.98
24h
Available quantity: 4
Available
Other products in the same category (16)
10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi
zł359.00
24h
Available quantity: 9
Available
IPS LCD 7 "touch screen display for Raspberry Pi. The display is equipped with HDMI interface for image display and USB for touch screen. Resolution 1024x600 pixels. Waveshare 7inch HDMI LCD (C)
zł185.19
24h
Available quantity: 21
Available
5" LCD IPS display. The display is equipped with a DPI interface for image display. Resolution 800x480 pixels. Waveshare 5inch DPI LCD
zł157.34
24h
Available quantity: 1
Available
Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)
zł102.18
24h
Available quantity: 7
Available
Module with e-Paper display, 5.83" diagonal and 648x480 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT (B)
zł257.18
24h
Available quantity: 1
Available
7" IPS LCD display with a touch panel. Equipped with a DSI interface for displaying the image and I2C for operating the touch panel. It has a resolution of 800x480 px. Waveshare 7inch DSI LCD (B)
zł206.30
24h
Available quantity: 5
Available
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM299
zł147.00
4 weeks
No product available!
IPS LCD 7 "touch screen display for Raspberry Pi. The display is equipped with HDMI interface for image display and USB for touch screen. Resolution 1024x600 pixels. Waveshare 7inch HDMI LCD (C) (with bicolor case)
zł199.00
24h
Available quantity: 11
Available
Module with a black and white OLED display with a diagonal of 1.3" and a resolution of 128x64 px. Designed for minicomputers Raspberry Pi. Adafruit 3531
zł114.08
24h
Available quantity: 1
Available
The module with a color LCD display with a diagonal of 1.14". It has a resolution of 240x135 pixels and an ST7789 controller. Communication with the module is realized via the SPI interface. Waveshare 1.14inch LCD Module
zł30.43
24h
Available quantity: 2
Available
Module with e-Paper display, 9.7" diagonal and 1200x825 px resolution. Communication via USB, SPI or I80 interface. Waveshare 9.7inch e-Paper HAT
zł831.98
4 weeks
No product available!
Adafruit 1933
zł412.44
24h
Available quantity: 1
Available
Module with a black and white OLED display with a diagonal of 1.3". It has a resolution of 128x64 pixels and a SH1107 controller. Communication with the module is carried out via the I2C or SPI interface. WSH 1.3inch OLED Module (C)
zł32.73
24h
Available quantity: 4
Available
IPS 11.6" LCD display with touch screen. Equipped with HDMI interface for image display and USB to touch panel. Resolution 1920x1080 pixels. Waveshare 11.6inch HDMI LCD (H) (for EU)
zł740.14
24h
Available quantity: 4
Available
Module with a black and white e-Paper display with a diagonal of 2.13". It is equipped with an SPI interface for displaying an image and I2C for a touch panel. Waveshare 2.13inch Touch e-Paper HAT
zł83.94
24h
Available quantity: 3
Available
The 5-inch IPS LCD display has a resolution of 800 x 480 pixels. It has a thin and lightweight design and communicates via the DSI interface. Waveshare 50H-800480-IPS
zł132.75
24h
Available quantity: 2
Available
2.13 "e-Paper flexible display HAT designed for Raspberry Pi minicomputers. Communicates with external systems via the SPI interface. The module has support in the form of examples for Raspberry Pi, Jetson Nano, STM32, Arduino. Waveshare 2.13inch e-Paper HAT (D)