zł99.90
New products
New products New products
Pimoroni Pico LiPo 2 development board – RP2350B, 16MB Flash, 8MB PSRAM, USB-C, LiPo, Qw/ST – PIM775
zł109.74
24h
Available
zł153.64
24h
Available
zł75.41
24h
Available
Available
Available
1.54" Tri-Color E-Ink e-Paper Display Module 200x200 - Waveshare 13338
ID: 569490
5906623422029
zł54.45
Tax included
zł44.27 tax excl.
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller
Description
Display module made in E-Ink technology (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200. The module has a built-in controller communicating via the SPI interface. It enables displaying the image in three colors: red, black and white. The display's power supply is only necessary to change the screen content, refresh it, ideally suited to applications that require a long battery life, additionally the display has a large viewing angle, above 170 °, which makes it ideal it is suitable for industrial applications in control and measurement devices with slow changes in the value of the measured quantity.
Features
- The display does not have a backlight so that the image stays on for a long time after turning off the power
- Very low power consumption, energy is only needed to refresh the screen content
- Extensive development support, user manual, programming resources in the form of a driver board diagram, examples on Raspberry Pi, Arduino and STM32
properties
- Diagonal: 1.54 "
- Resolution: 200 x 200
- Communication interface: SPI (3 and 4 wire)
- Spot size: 0.138 mm x 0.138 mm
- Display colors: red, black, white
- Gray scale: 2
- Time to refresh the whole screen: 14 seconds
- The power needed to refresh the screen: 26.4 mW (typical)
- Power in standby mode: <0.017 mW
- Viewing angles:> 170 °
- Operating voltage: 3.3 V
- The size of the displayed image: 27.6 mm x 27.6 mm
- External dimensions: 48 x 33 mm
569490
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 1,54
- Resolution
- 200 x 200 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
E-Ink display (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 2.9inch e-Paper (B)
zł58.82
Delivery date unknown
No product available!
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller. Waveshare 1.54inch e-Paper (B)
zł38.43
Delivery date unknown
No product available!
E-Ink display module (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 12956
zł66.16
24h
Available quantity: 3
Available
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller
zł54.45
24h
Available quantity: 1
Available
Other products in the same category (16)
Graphic display 128x64, 45x40mm, Type: COG, small sizes, FFSTN, 3.3V, ST7565R outline
zł33.90
24h
Available quantity: 1
Available
ABC016002C41-DLW-R LCD display 2x16, 122x44mm, BIG, LED backlight (WHITE)
zł38.90
1 weeks
No product available!
ARGON-ONE-V5-OLED-Module is a compact 0.96" OLED display module designed as a functional extension for the Argon ONE V5 case for Raspberry Pi. It enables convenient viewing of basic system operating parameters without the need to connect an external monitor, enhancing usability in server, monitoring, or educational applications. Ideal for upgrading Raspberry Pi-based workstations in environments requiring an aesthetic and functional solution.
zł57.00
24h
Available quantity: 2
Available
PhotoPainter (B) with a 7.3" e-paper display using E6 Full Color technology is a modern, energy-efficient electronic frame with rich functionality and aesthetic design. Thanks to programmable features, built-in memory support, RTC, and battery power, it serves both as a personal graphic display and a digital frame with content scheduling functionality. An ideal choice for office interiors, galleries, or as a designer décor element.
zł406.31
4 weeks
No product available!
Module with 4-digit 7-segment display. The board is equipped with the TM1637 driver and communicates via the digital interface
zł8.99
24h
Available quantity: 11
Available
4-color e-Paper display with a diagonal of 4.37 "and a resolution of 512x368 px. Communicates via the SPI interface. Waveshare 4.37inch e-Paper (G)
zł145.46
24h
Available quantity: 2
Available
Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)
zł105.90
24h
Available quantity: 5
Available
5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (G)
zł193.97
24h
Available quantity: 1
Available
Alphanumeric display 16 characters in two rows, content green, black background.
zł25.85
24h
Available quantity: 2
Available
Module with a black and white OLED display with a resolution of 128x64 px, designed for FireBeetle plates. It communicates via the I2C interface. DFRobot DFR0507
zł63.00
24h
Available quantity: 2
Available
Waveshare 2.13" e-Paper HAT+ e-paper display is a compact, energy-efficient module with partial refresh capability, designed for use with Raspberry Pi. Thanks to a high-precision RTC, compatibility with popular platforms, and robust Immersion Gold PCB construction, it is well suited for IoT devices, information systems, tags, and mobile applications requiring long battery life.
zł69.81
4 weeks
No product available!
Module with an IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels dedicated to Raspberry Pi Pico boards. It uses the DVI interface for communication. Waveshare PICO-DVI-7inch
zł128.40
24h
Available quantity: 1
Available
LCD TFT 5" display with touch screen. The display is equipped with an HDMI interface and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (H) V4
zł201.44
24h
Available quantity: 3
Available
7-segment LED display, 1 digit 20.40mm, green color (570nm), 15 mcd (10mA), common anode, Pb-free. LED1-AS-B-08011BMG
zł1.50
24h
Available quantity: 16
Available
The driver for e-Paper displays with a built-in ESP32 module that provides communication via WiFi and Bluetooth. The board allows you to display images on e-Paper displays from a computer or smartphone. Waveshare e-Paper ESP32 Driver Board
zł63.47
24h
Available quantity: 4
Available
3.5" display with 480x320 16-bit color pixels and a resistive touch overlay, engineered specifically to work with the newer "2x20 connector" Raspberry Pi\'s. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Adafruit 2441
zł265.04
4 weeks
No product available!
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller