1.54" Tri-Color E-Ink e-Paper Display 200x200 - Waveshare 13275
ID: 569486
zł38.43
Tax included
zł31.24 tax excl.
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller. Waveshare 1.54inch e-Paper (B)
Description
Display made in E-Ink technology (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200. The module has a built-in controller communicating via the SPI interface.It enables displaying the image in three colors: red, black and white. The display's power supply is only necessary to change the screen content, refresh it, ideally suited to applications that require a long battery life, additionally the display has a large viewing angle, above 170 °, which makes it ideal for industrial applications in control and measurement devices with free changes in the value of the measured quantity.
Features
- The display does not have a backlight so that the image stays on for a long time after turning off the power
- Very low power consumption, energy is only needed to refresh the screen content
- Extensive development support, user manual, programming resources in the form of a driver board diagram, examples on Raspberry Pi, Arduino and STM32
properties
- Diagonal: 1.54 inches
- Resolution: 200 x 200 pixels
- Communication interface: SPI (3 and 4 wire)
- Spot size: 0.138 x 0.138 mm
- Display colors: red, black, white
- Gray scale: 2
- Time to refresh the whole screen: 14 seconds
- The power needed to refresh the screen: 26.4 mW (typical)
- Power in standby mode: <0.017 mW
- Viewing angles:> 170 °
- Operating voltage: 3.3 V
- The size of the displayed image: 27.6 x 27.6 mm
- External dimensions: 31.8 x 37.3 x 1.05 mm
569486
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 1,54
- Resolution
- 200 x 200 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
E-Ink display (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 2.9inch e-Paper (B)
zł58.82
Delivery date unknown
No product available!
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller. Waveshare 1.54inch e-Paper (B)
zł38.43
Delivery date unknown
No product available!
E-Ink display module (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 12956
zł66.16
24h
Available quantity: 8
Available
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller
zł55.31
Delivery date unknown
No product available!
Driver for EPAPIER displays in the form of a HAT overlay for Raspberry Pi computers. The SPI interface is used for communication with the controller. Waveshare e-Paper Driver HAT
zł36.37
24h
Available quantity: 11
Available
Other products in the same category (16)
Black and white e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Without PCB. Waveshare 2.13inch e-Paper
zł34.74
24h
Available quantity: 4
Available
Module with a 3-color (red, black, white) e-Paper display of 2.66" diagonal and 296x152 px resolution. It communicates via SPI interface. Waveshare 2.66inch e-Paper Module (B)
zł69.47
4 weeks
No product available!
Waveshare 30475 is a compact, energy-efficient 1.54-inch e-paper display capable of displaying content in four colors. Controlled via SPI interface, available as a raw panel or a ready-to-use module, it is ideal for use in labeling systems, IoT devices, and as a user interface element in microcontroller-based projects.
zł51.34
24h
Available quantity: 1
Available
Waveshare 7.3" (E) with HAT module is an advanced, full-color e-paper display based on E Ink Spectra 6 technology. The module is intended for applications where high readability, low power consumption, and image persistence are essential—such as electronic labels, asset tags, or information boards. It supports popular hardware platforms like Raspberry Pi, Jetson Nano, Arduino, and STM32, offering broad compatibility and flexibility in electronic project integration.
zł371.68
4 weeks
No product available!
Module with e-Paper display, 4.2" diagonal and 400x300 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-4.2
zł120.86
24h
Available quantity: 2
Available
The ESL-ePaper-3.5G display is an energy-efficient and durable solution for digital shelf labels and signage. With BLE communication and a four-color e-paper screen, it offers flexibility for commercial and industrial applications, enabling remote content management via the Waveshare.cloud platform and the ESL-Gateway-AP base station.
zł93.16
4 weeks
No product available!
Waveshare 3.52" (B) module with built-in e-paper display and HAT connector is an energy-efficient solution for visual data presentation in applications such as shelf labels, device markings, or information panels. Compatibility with Raspberry Pi, Arduino, STM32 platforms and support for the HAT+ standard facilitates rapid deployment and project development.
zł88.89
24h
Available quantity: 3
Available
e-Paper display with a diagonal of 4.26" and a resolution of 800x480 pixels. Thanks to communication via the SPI interface, it allows easy integration with various systems of microcontrollers and single-board computers. Waveshare 4.26inch e-Paper
zł112.98
24h
Available quantity: 1
Available
Module with black and white e-Paper display, 5.83" diagonal and 648x480 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT
zł223.48
4 weeks
No product available!
Module with E-Ink (e-Paper) display with a diagonal of 2.13" and a resolution of 250x122 px. Designed for minicomputers Raspberry Pi. Adafruit 4687
zł113.23
24h
Available quantity: 1
Available
Module with black and white e-Paper display, 3.7" diagonal and 480x280 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-3.7
zł138.45
24h
Available quantity: 1
Available
Module with 1.9" black and white e-Paper display. Built from 91 segments, communicates via the I2C interface. Waveshare 1.9inch Segment e-Paper Module
zł52.90
24h
Available quantity: 2
Available
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM299
zł147.00
4 weeks
No product available!
2.13 "e-Paper flexible display HAT designed for Raspberry Pi minicomputers. Communicates with external systems via the SPI interface. The module has support in the form of examples for Raspberry Pi, Jetson Nano, STM32, Arduino. Waveshare 2.13inch e-Paper HAT (D)
zł102.02
24h
Available quantity: 1
Available
4.3-inch e-paper display with 800x600 resolution. The display is equipped with the HX8705-B controller. The display is perfect for energy-saving devices, because it does not require power to display the image
zł269.17
24h
Available quantity: 1
Available
The 7.3", 7-colour ACeP e-Paper display has a resolution of 800x480 px. It has the ability to display images from a microSD card. Framed with a nice wooden border, it can be used as an electronic photo frame. Waveshare PhotoPainter (no BAT)
zł443.45
24h
Available quantity: 1
Available
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller. Waveshare 1.54inch e-Paper (B)