- Out-of-Stock
STM32MP157A-DK1 - starter kit with microprocessor STM32MP157A
ID: 574375
Starter kit with STM32MP157A application microprocessor (combination of a typical processor with Cortex-A7 core and microcontroller with Cortex-M4 core). The system allows users to create applications using the STM32 MPU OpenSTLinux Distribution software for the main processor and the STM32CubeMP1 software for the coprocessor. STMicroelectronics STM32MP157A-DK1
Description
STM32MP157A-DK1 is a starter kit with an application microprocessor from the STM32MP series from STMicroelectronic. The STM32MP157A system is a combination of a typical processor with a core Cortex-A7 and a microcontroller with a Cortex-M4 core. The combination of these two cores allows users to create applications using the STM32 MPU OpenSTLinux Distribution software for the main processor and the STM32CubeMP1 software for the coprocessor. The chip is also equipped with a GPU graphics coprocessor (compatible with OpenGL ES 2.0).
The STM32MP1 microprocessor has integrated interfaces for external DRAMs. Thanks to the built-in hardware interfaces it can also directly use the memory of Flash eMMC constants, NAND Flash (serial or parallel), NOR Flash (serial), and SD cards. The kit also has a built-in Ethernet 1 Gb / s and USB interface. The system is powered by a specialized PMIC power supply system that integrates a 6-channel LDO stabilizer, a 3-channel DC / DC converter and a DC / DC converter.
properties
- STM32MP157A based on a Cortex-A7 dual core 32 bits and Cortex-M4 32 bits MPU in a housing TFBGA361
- ST PMIC STPMIC1A power supply system
- 4-Gbit DDR3L, 16 bits, 533 MHz
- 1 Gbps Ethernet (RGMII) compatible with IEEE-802.3ab
- USB OTG HS
- Audio codec
- 4 user LEDs
- 2 user and reset buttons, 1 wake-up button
- USB 5 V / 3 A power input type C
- Connectors:
- RJ45 Ethernet
- 4 x USB Type A host
- USB Type-C DRP
- MIPI DSISM
- HDMI
- Jack connector (headphone jack with analog microphone input)
- MicroSD card slot
- GPIO extension connector (compatible with Raspberry Pi pads)
- Arduino Uno V3 expansion connectors
- Built-in debugger / ST-LINK / V2-1 programmer with the ability to be used as USB: virtual COM port and debug port
- STM32CubeMP1 and full open-source Linux support STM32 MPU OpenSTLinux Distribution
- Support for integrated development environments (IDE), including IAR, Keil, GCC IDE
574375
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Starter kit with STM32MP157DAC1 application microprocessor (Cortex-A7 and Cortex-M4). It is equipped with Ethernet 1 Gb/s, USB type C connector and 4 USB type A sockets. It has a built-in ST-LINK/V2-1. STMicroelectronics STM32MP157D-DK1
zł390.76
Delivery date unknown
No product available!
Other products in the same category (16)
Module with a current and voltage sensor. Can measure voltage up to 26 V and current up to 3.2 A. Based on INA219 sensor, I2C communication. SparkFun SEN-15176
Retired
No product available!
Module with ultrasonic distance sensor HC-SR04 with a range of up to 400 cm. It communicates via the I2C interface. SparkFun SEN-15171
Retired
No product available!
Module with transparent OLED display. It has a display area of 128 x 64 pixels, of which 128 x 56 pixels are completely transparent. I2C or SPI communication. SparkFun LCD-15173
Retired
No product available!
Module with a 1.3" black and white LCD display. It has a resolution of 144x168 pixels and a built-in SRAM memory. Communication is realized via the SPI interface. Waveshare 144x168, 1.3inch Bicolor LCD
Retired
No product available!
The housing for the Odroid XU4 minicomputer in blue. The housing protects the computer against dust and mechanical damage.
Retired
No product available!
Keychain key locator equipped with Bluetooth 4.0 module. It is used to locate easily lost objects (eg keys, bags). Blow iTag
Retired
No product available!
Development board with an ESP32 module based on a 32-bit Xtens LX6 processor. It has been equipped with a number of peripheral systems such as RGB LED matrix, accelerometer, magnetometer, gyroscope, light sensors and programmable buttons. Banana Pi BPI-Bit
Retired
No product available!
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU chip and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has a DDR4 4GB RAM memory. NVIDIA Jetson Nano Development Kit rev. B01 945-13450-0000-100
Retired
No product available!
GD32F103CBT6, ARM Cortex-M3 microcontroller; SRAM: 20kB; Flash: 128kB; 108MHz; LQFP48
Retired
No product available!
The official HDMI 2.0 cable for Raspberry Pi with a length of 1m in black. Compatible with Raspberry Pi 3 and previous versions.
Retired
No product available!
LED RGB bulb controlled via WiFi. It has the popular E27 luminaire. It allows remote control of color, brightness and color temperature using the EWeLink application. Sonoff B1
Retired
No product available!
Kit with LED strip controlled by WiFi. It is resistant to water (IP65 standard) and can glow to the music. Controlled by the EWeLink application. Sonoff L1 Smart Led light Strip
Retired
No product available!
USB keyboard in black, with standard function keys. The keyboard works with Raspberry Pi, Odroid and other computers. Titanum TK101
Retired
No product available!
The official power supply for Raspberry Pi with 5.1V output voltage and 2.5A current efficiency. White power supply.
Retired
No product available!
The official power supply for Raspberry Pi with 5.1V output voltage and 2.5A current efficiency. Black power supply.
Retired
No product available!
Logic module LOGO! 12/24RCEO with Ethernet interface and WEB server. It has a 400-block memory and a data logging function on the microSD card, it has no display. Siemens 6ED1052-2MD08-0BA0
Retired
No product available!
Starter kit with STM32MP157A application microprocessor (combination of a typical processor with Cortex-A7 core and microcontroller with Cortex-M4 core). The system allows users to create applications using the STM32 MPU OpenSTLinux Distribution software for the main processor and the STM32CubeMP1 software for the coprocessor. STMicroelectronics STM32MP157A-DK1